Question about 2003 Toyota 4Runner

2 Answers

What is the wiring diagrams for 2003 Toyota 4runner: with code P2118. how do I measure the voltage from the battery supply voltage applied to the electronic throttle actuator?

Can I have a PDF, or some kind of wiring diagrams, Videos? Thanks,

Posted by Maxwell on

  • Ngoro Jun 05, 2015

    What engine you have(2UZ-FE 4.7L?)?

  • Maxwell
    Maxwell Jun 20, 2015

    Hello people. my problem have been. it was a bad fuse. I'm so happy that I now have my baby running. Thanks guys for all the your comments.

×

Ad

2 Answers

Robert Wood

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,100 Answers

Be careful to never place your fingers in an electronically controlled throttle body as it could open and close on your fingers causing serious injury. BBB Industries should list a wiring diagram for your vehicle.

Posted on Jun 05, 2015

Testimonial: "Thank you for the wiring diagrams."

Ad

Steve_53

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 23 Answers
Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pump connector wiring diagram for 2003 toyota 4runner 4.7l engine


Pin - 1. Orange 2. Yellow / Red 3. Brown / Black 4. Blue / Orange 5. White / Black

Jun 06, 2016 | 2003 Toyota 4Runner SR5 V8

2 Answers

Kindly help me with the wiring dirgram for 2003 toyota 4Runner with engine 4.7 V8.


Start by checking the ETCS fuse in the engine room fuse box. If it's good, you may have an open circuit between the fuse box and ECM.

Jun 11, 2015 | 2003 Toyota 4Runner

1 Answer

P2118


code p2118 refers to throttle actuator control (ATC) throttle motor current--range/performance problem===causes--wiring --throttle motor.
check that the wiring connections are clean and tight then replace the ATC unit

May 20, 2014 | Cars & Trucks

1 Answer

Hello, I have a 05 toyota camry that wont go more than 5 miles an hour. is giving me code p2118, I replaced the ETCS fuse, but still doing the same, is there anything else


P2118 Throttle Actuator Control Motor Current. Range performance problem. P2118 sets when the power supply voltage to the throttle actuator motor is out of range. The throttle actuator motor has its own regulated power supply in the PCM. If the supply voltage is less than 4 volts, the system shuts down, the code will set and the MIL will illuminate. The normal operating range for the power supply is 9 to 14 volts. To solve the problem you are having, I set up a pdf with all the instructions including the diagrams to fix your problem. Click on this link and it will lead you to the pdf. http://highlanderclub.ru/files/manual/04/21j6674h/cip2118.pdf

Oct 26, 2011 | Cars & Trucks

2 Answers

Code p2118


p2118 means low juice battery, recharge the battery or install a new one. however your battery still good (some what) then start the car and let it idle to charge the bat.

normally when you have p2118 you won't be able to accelerate - why Throttle Actuator Control Motor Current Range is too low.

Aug 05, 2008 | Toyota Corolla Cars & Trucks

Not finding what you are looking for?
2003 Toyota 4Runner Logo

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...