Question about Fiat Siena

1 Answer

Camshaft valve timing marks for Fiat Siena 1.6 16V, 1995 to 2002 model

Posted by George on

Ad

1 Answer

paul fairbanks

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Fiat Master
  • 1,147 Answers

There are no timing marks for camshafts you need a fiat tool to lock the cams rear of engine but if you mark the cam sprockets carefully before you dismantle you should be ok if not borrow the fiat tools the crankshaft marks are on the front pulley end about @aprox.10oclock position

Posted on Oct 19, 2017

Ad

5 Related Answers

Marty marty

  • 883 Answers

SOURCE: camshaft timing mark

here's a graphic:
df5d4d2.jpg
please rate me solved!
Thanks!

Posted on Jun 26, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: timing belt problem on fiat brava

timming marks on fiat brava

Posted on Mar 01, 2009

Anonymous

  • 1066 Answers

SOURCE: fiat ducato timingbelt problem

on the front engine pulley/harmonic balancer or in a hole on the bellhousing. 

Posted on Mar 11, 2009

motor1258

Mike Butler

  • 6674 Answers

SOURCE: camshaft timing mark crankshaft timing mark

Belt covers need to be on. Timing mark on crankshaft (while on compression stroke) should line up with TDC mark on cover. then Camshaft mark, needs to line up by looking through access hole of cover, and align mark on cam sprocket with pointer on inside of belt cover.

Posted on Oct 22, 2009

Patrick Rayome

  • 1757 Answers

SOURCE: isuzu trooper 2002 RLV engine. camshaft timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cam timing for fiat siena 1.2 2001


There are no timing marks on this engine - the engine has to be "locked" using special engine locking / setting kit which you wil have to obtain to do the job.

I will give you the instructions to do the job for when you have the locking kit to do the job.. as follows:

Removal
  1. Raise and support front of vehicle.
  2. Remove:
      • RH front wheel.
      • RH inner wing panel.
      • Air filter assembly.
  3. Support engine.
  4. Remove:
      • RH engine mounting and bracket.
      • Timing belt upper cover,
      • AC receiver/drier (if fitted). DO NOT disconnect hoses.
      • Timing belt lower cover.
      • Auxiliary drive belt.
      • Support bracket between gearbox and cylinder block (Palio).
  5. Palio: Remove bell housing cover plate. Fit flywheel locking tool. Tool No.1.867.029.000. or equivalent commercially available.
  6. Remove:
      • Crankshaft pulley bolts
      • Crankshaft pulley
      • Spark plug leads.
      • Ignition coil and bracket.
      • Spark plugs.
  7. Fit dial gauge and adapter to No.1 cylinder. Tool No.1.860.895.000.
  8. Turn crankshaft to TDC on No.1 cylinder. Set dial gauge to zero.
  9. Ensure notch in rear of camshaft aligned as shown.
  10. Install camshaft aligning tool. Tool No.1.870.823.000

  11. NOTE: If camshaft aligning tool cannot be fitted: Turn crankshaft one turn clockwise.

Installation
  1. Ensure No.1 cylinder at TDC by turning crankshaft slightly clockwise and anti-clockwise. Use dial gauge .
  2. Ensure camshaft aligning tool fitted correctly
  3. Hold camshaft sprocket. Use tool No.1.860.831.000/001
  4. Slacken camshaft sprocket bolt
  5. Fit timing belt in following order:
      • Crankshaft sprocket.
      • Water pump sprocket.
      • Camshaft sprocket.
      • Tensioner pulley.
    NOTE: Observe direction of rotation marks on belt.
  6. Fit tensioning tool locating pegs to tensioner pulley holes -Tool No.1.860.745.100/300. Ensure tensioning tool arm is horizontal.
  7. Set weight at 70 mm mark on scale bar.
  8. Hold camshaft sprocket
  9. Tighten camshaft sprocket bolt - Tightening torque: 70 Nm.
  10. Remove aligning tool
  11. Turn crankshaft two turns clockwise.
  12. Ensure No.1 cylinder at TDC by turning crankshaft slightly clockwise and anti-clockwise. Use dial gauge
  13. Ensure camshaft aligning tool can be fitted - If not: Repeat installation procedure.
  14. Tighten tensioner nut to 28 Nm
  15. Remove:
      • Tensioning tool
      • Camshaft aligning tool
      • Dial gauge
  16. Install components in reverse order of removal.
  17. Tighten crankshaft pulley bolts - Tightening torque: 20 Nm + 90°.

Jun 26, 2016 | Fiat Cars & Trucks

1 Answer

Want to set timing on a fiat sienna but cant find timing marks


Im afraid you do need a special set of tools for this engine - they lock the engine and time it up accurately, you cant do without Im afraid.The tool kits come with full instructions so once you have obtained one, you will be able to time it no problem.

Apr 01, 2014 | 2005 Fiat Siena

1 Answer

Engine diagram fiat siena


our fiat 2001 1.6 refuses too keep da idle

May 08, 2013 | 2005 Fiat Siena 1.6

1 Answer

I need a diagram for a fiat siena 1.6 elx for timing marks


i have trouble with my fiat punto 1.6elx mk1, water heater pipe is leaking and drop to the ECU box, until now my foreman change the ecu for 3 time but not solve the trouble, the engine can crank, but won't running, indicator "code" still light won't of.. pls help me..

Apr 14, 2013 | Cars & Trucks

1 Answer

TIMING SETTINGS FOR FIAT UNO


timing marks ? bottom pulley with crank keyway pointing upwards and cam ? sorry just cannot remember offhand but this is a valve free engine ,with no1 at TDC the inlet and exhaust valves are pointing up and out on the no1 then if i remember rightly the mark on camshaft gear is pointing directly in line with the right side of the head ? or is that the peugeot ,if i had a memory ? Sorry just cannjot remember but a 94 has a distributor on the back of the cam and the rotor arm will pointing at the no1 plug lead on the cap .

Feb 20, 2013 | 1994 Fiat Uno

1 Answer

I am looking for a fiat siena 1.6V 1600, 16valve timing diagram


There is no such timing diagram in particular is provided except the R&D or the manufacturer, but the marking on the engine is mandatory, and its being well marked for the technicians on the assembly floor and service work shops, Service man has more brains than R&D fellow coz understanding other persons doings more efforts or you can say following some body's car is more difficult than..........

Jan 11, 2013 | 2005 Fiat Siena 1.6

1 Answer

Timing diagram for a fiat siena 1600 16valve


You need a timing kit in order to lock de camshafts and the crankshaft; as far as I know, there's not timings marks on the gears.

Jan 11, 2013 | Fiat Siena Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

3,428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Gustavo Ortiz
Gustavo Ortiz

Level 3 Expert

637 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...