I NEED A DIAGRAM FOR ROUTING OF SERPENTINE BELT ON 1987 FORD F150 PICKUP 302

There should be a diagram of the belt path on inside of the engine compartment. It will be on the under side of the hood or right by the latch.

http://gates.com/part_locator/index.cfm?location_id=3598

just punch in your truck info. Then click on the camera icon on the serpentine belt listing, it will show the routing.

there should be a white decal on the upper rad support bar that shows you the belt routing,in not then draw how the belt is routed before you take it off the car.the parts store may have a routing diagram,if the belt broke then if you know someone with the same type and engine size maybe they will let you look at the belt routing.you can also go to the library and take out a book or draw the routing from the book for your car.

Who is all the dumb jakelegs who put serpentine belt routings on here for a v-belt truck. A bunch of Dumb A holes

Please don't forget to rate! Thanks a million!!!

Accessory serpentine belt routing-4.6L, 5.4L, and 6.8L engines with A/C

Accessory serpentine belt routing-4.6L, 5.4L, and 6.8L engines without A/C

For the 1987 Ford F150:

I do not know if you have the 4.9L In-Line 6-Cylinders, 5.0L V8, or the 5.8L V8 Engine or what Engine Options ( AC/No AC, etc.).

Click on the following free direct Link. It has several Serpentine Belt Diagrams for the 1987 Ford Pickups.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/pickup/1987_ford_pickup_drive_belt_routing_diagram.htm

heres a site that will do the trick


http://www.ford-trucks.com/forums/619231-serpentine-belt-remove-replace.html

hope this helps

HI. you can view an image of the routing by clicking the link below.

CLICK HERE FOR ROUTING.

1990 Ford F Series Pickup 6-Cyl. 4.9 L
Automotive V-Ribbed Belt (Standard)
Serpentine; W/A.C.; W/Auto. Trans



Automotive V-Ribbed Belt (Standard)
Serpentine; W/A.C.; W/Man. Trans



Automotive V-Ribbed Belt (Standard)
Serpentine; W/O A.C



Is this engine is your model, I hope help you with this. Good luck.

call a parts store they usually can provide you the routing for serpantine belts good luck getting it right though it can be tricky pay close attention to how the belt is routed :)