Question about 2007 Toyota avensis 1.6

Open Question

Does my Toyota had detrrent system?

Detrrent system sets automaticlly.. if the windows are open and unlock it from inside it will sound the alarm? thank you

Posted by Ina-ina Sinani on

Ad

4 Related Answers

Anonymous

  • 4 Answers

SOURCE: 1998 Toyota Camry car alarm keeps going off.

I have this same crazy problem with my Camry. When you push the button then open the door on the driver side really quick, the alarm starts to blow off. So what I used to do everytime is push the button to unlock all the doors then open whichever door you want. It won't scream. Try it.

Posted on Apr 05, 2009

Ad

Anonymous

  • 160 Answers

SOURCE: 1992 Toyota Cressida Alarm - son's car.

NOT SURE IF THIS WORKS ON THIS MODEL (KINDA OLD FOR ME) HOWEVER TRY UNLOCKING PASSENGER SIDE DOOR TWICE TO RESET SYSTEM LET ME KNOW AND PLEASE RATE THIS

Posted on Apr 19, 2009

Ad

Anonymous

  • 88 Answers

SOURCE: 95 Toyota Camery, The car remote locks and

if the light is flashing and the central locking works then its all good the speaker wire has maybe broken inside plastic casing but hey if it all works with out the noise then leave it

Posted on Aug 07, 2009

Anonymous

  • 1 Answer

SOURCE: alarm system stuck on my toyota paeseo

chang the battery

Posted on Oct 25, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Alarm wont stop sounding!


although you can open the door with a key ,unless the alarm system senses a fob key signal it will assume that the door is being opened illegally and will set of the alarm
keys can be cut for all cars requiring a key fob unit but the alarm is not cancelled and the engine will not start
you may have to get another key fob and have it programmed to the ECM system

Apr 23, 2015 | 1994 Chrysler Concorde

Tip

How to set & cancel theft deterrent system or how to set & cancel security...


Theft deterrent system (on some models)

Theft deterrent system is designed to deter vehicle theft. The system flashes the turn signal lights and turns on the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn when it detects abnormalities such as follows:

• Any door or hood is forcibly opened.
• The batter terminal is disconnected and then reconnected
• The system control is disconnected and then reconnected.
• Abnormal impact is detected when the impact sensor function is on.

The system flashes the turn signal lights and turns the interior light or the signal lights only (depending on the model), and sounds security horn and vehicle horn if someone attempts to damage or break into your car.

Setting the system

You can set the system with or without the impact sensor function. For details, see "Canceling the impact sensor" below.

1. Turn the ignition key to "LOCK" and remove it.
2. Have all passengers get out of the vehicle
3. Push the lock (set) switch on the wireless remote control key once. At this time, the turn signal lights flashes once and the security indicator light comes on.

The system is set after 30 seconds. At this time, the security indicator light start flashing slowly.

Once the system is set, you cannot start the engine until you cancel the system.

The system will not be set in the following cases.

• When any of the door is open; security horn sounds for 1 second, close the door and set the system again.
• When the hood is open; close the hood securely.

Canceling the Impact Sensor

The impact sensor can be cancelled to prevent false alarms from being triggered incase of the following conditions:

• When parked in the noisy area
• The vehicle body or glass is subjected to a strong impact from the (such as in highly pressurized car wash).
• When transporting by a car carrier or ferry.

To cancel the impact sensor;

1. Lock the door by pushing the lock (set) switch on the wireless remote control key once, and turn signal light flash once
2. Then push the lock (set) switch twice within 5 seconds. At this time, the turn signal flash 5 times to indicate the impact sensor function is disable.

The impact sensor is deactivated as long as the system remained armed.

Canceling the system

The system will be cancelled by the following two ways:

• Turn the ignition key from "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch

If the turn signal lights flash 3 times, the system has been alarmed. Check to see if there is any abnormality with your vehicle.

If any of the doors is not opened within 30 seconds, all doors will be automatically locked and the system will be set.

When the system is set

Activating the system; When the system detects abnormalities such as follows, it flashes the turn signal lights and turns on the interior light or the turn lights only (depending on the model) and sounds the security horn and vehicle horn of 30 seconds.

• Unlocking any door without using wireless control
• Any door or hood is forcibly opened.
• The battery terminal is disconnected and then reconnected.
• The system control assembly is disconnected and then reconnected
• Abnormal impact is detected when the impact sensor function is on.

Reactivating the alarm;

Once set, the system automatically resets the alarm after the alarm stops.

The alarm will activate again under the same circumstances described in "Activating the system".

Stopping the Alarm

The alarm will be stopped by the following two ways;

• Turn the ignition key from the "LOCK" to "ON" position.
• Unlock any of the doors by pushing the unlock (cancel) switch.

The system can be cancelled by these ways at the same time.

If the battery becomes discharged due to the vehicle being unused, for a long time etc., when the battery is recharged or replaced, the system will activate the alarm. If this happens, immediately unlock any of the doors by pushing the unlock (cancel) switch, and the alarm will stop.

Testing the system

1. Set the system
2. Insert a wireless remote control key into the key hole on the driver's door handle, and unlock the door.
3. Open the door, and an alarm will sound.
4. Stop the alarm by pushing the unlock (cancel) switch.
5. Repeat this operation for the front passenger's door.

Good luck.

on Nov 08, 2010 | Toyota Pickup Cars & Trucks

1 Answer

Door locks unlocks


Sounds like the main wiring loom into the door has been damaged.
Check near the hinges, where the door swings, to see if any damaged wires. Does the door lock and unlock from the drivers side switch?

Jan 04, 2014 | Toyota Cars & Trucks

1 Answer

How to re activate my alarm system on corolla 2010 factory alarm


change the set up in anti thief control module . use by toyota scaner

Dec 21, 2013 | Toyota Corolla Cars & Trucks

1 Answer

Xr6 05 alarm system


sounds like a problem with the unit, either the unlock output isn't hooked up, or it's bad...

-------------
32MB Card for GM TECH2 6 Software

Jun 21, 2012 | Ford Falcon Cars & Trucks

2 Answers

How do you reset the alarm on a 1999 toyota camry if i dont have the remote locking mechanisim


Operation of the theft deterrent system is discussed in the 1999 Toyota Camry Owner's Manual beginningh on page 21. Unlocking the door with the key should disarm the alarm system. If it does not disarm when using the key, there are only two possibilities:

> You have an aftermarket alarm system installed in addition to the system tht was provided by the manufacturer and they are interfering with each other.

> OR

> Your vehicle needs service to correct the malfunction.

You might try unlocking the car from the passenger side or use the key to open the trunk first to see if this works. If it does, the switch inside the driver door is probably malfunctioning.

Apr 07, 2012 | 1999 Toyota Camry

1 Answer

My alarm is activating itself. How can I permenantly disable the alarm? I've had to do it before but I can not remember which fuse we removed.


When you close the door, the alarm will arm itself even if you do not set it. When you open the unlocked door, the alarm will sound.

Jan 11, 2011 | 1998 Toyota 4Runner

1 Answer

95 Toyota Camery, The car remote locks and unlocks, the security led flashes when set, the locking and unlocking beeps and alarm sounds are now gone. Whole system replace or is it the loud speaker unit...


if the light is flashing and the central locking works then its all good the speaker wire has maybe broken inside plastic casing but hey if it all works with out the noise then leave it

Jul 19, 2009 | 1995 Toyota Camry

1 Answer

How to set factory alarm without remote, togle switch enabled


factory alarms are passive, if it is working it sets itself when u exit the car. u don't need the remote for the alarm to work if it has a factory system. if u want to test if it is working lock the car with the power lock button and leave the window down, reach inside the car and open the door from the inside handle, the alarm will sound if it is working, to disarm just lock and unlock driver door with the key..

May 31, 2009 | 1993 Nissan Pathfinder

3 Answers

1992 Toyota Cressida Alarm - son's car.


NOT SURE IF THIS WORKS ON THIS MODEL (KINDA OLD FOR ME) HOWEVER TRY UNLOCKING PASSENGER SIDE DOOR TWICE TO RESET SYSTEM LET ME KNOW AND PLEASE RATE THIS

Apr 19, 2009 | 1992 Toyota Cressida

Not finding what you are looking for?
2007 Toyota avensis 1.6 Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...