I orderd roof racks for a ford focus 05 estate and it looks as if they sent me the wrong ones they sent me bars for raiesd track raiels

A good roof rack shop will be able to put you on the right track

contact the seller

There are tabs to open two small covers (one on each side of the handle). Use a flat screwdriver to open them and it will expose each screw. Remove the screws and it will come off. Then do the reverse. I am assuming you mean the inside roof grab bar a and not the outside roof rack.

A Ford Focus is not suitable to fit a tow bar to.

this is one job that,unless you are a dab hand at trimming,is best left alone(if it aint got em,forget it)fit clamp on roof bars instead.

check that the antenna is plugged into the back of the unit or look under your fender and make sure it is plugged in there as well or use manual search instead of autosearch

On my 05 model, you need to twist the ford badge on the bonnet anti-clockwise, pushing the left side of the badge down, which will reveal a keyhole. This is then opened with your ignition key. Once the bonnet pops, you just need to release the bonnet catch.
Hope this helps.

about 2 hrs work involved including the tracking,so see what local labour charges are

about 600miles depending on driver and conditions .roof rails ??never done one sorry