You didn't get everything hooked up right or missed something !
There was only two bolts I put a computer on it it pulled up coolant temperature sensor high input and map I replaced the coolant temperature sensor and theres no fire coming out the coils
Well your going to need to check voltages at the coil, should have battery voltage. Check an see if the engine computer is turning the coils on an off ! Do you know what youtube is ? Watch some videos on ignition system testing . There are a lot of good ones on there , check out scanner danner videos he is a teacher an he is good.
×
SOURCE: i have a 2002 mitsubishi
(first check on the passenger side floor alone the fuel line for a reset switch ) then test the pump wiring and fuses, crack the fuel line in the engine bay and crank the engine, making sure you haven't air locked the fuel line. failing all the above remove the plugs and put back the old ones, might be the wrong parts. best of luck.
313 views
Usually answered in minutes!
×