2001 Chrysler PT Cruiser Logo

Related Topics:

Anonymous Posted on May 04, 2015

I got two codes from my 2001 pt cruiser. p0700 and p0725. What is that telling me?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Jeep Liberty 03 I fix power steering & crank & cam sensor now two mre code come up P0700 P0725 is this normal for more code to keep going ?

Those are transmission codes. P0700 is to alert you to the fact the transmission has a fault code stored, the P0725 is the fault that has occurred. Follow the link for info on P0725
P0725 Jeep Engine Speed Sensor Circuit
0helpful
1answer

2001 pt cruiser codes. p0731. p0700. p0500

P0500 - Speed sensor circuit problem.
P0700 - Transmission Control System Malfunction
P0731 - Incorrect 1st Gear Ratio

Did you forget to reconnect something on your transmission? Check your electrical cables.
0helpful
1answer
4helpful
2answers

What do the codes P1684 and P0700 mean?

Hi Rich Stuck,P0700 means Transmission Control System (MIL Request),P1684 means Battery Disconnected within last 50 starts.More read Diagnostic Trouble Code Table ,hope it can help you.
2helpful
2answers

Can you tell me what the codes PO605 and PO700 are? PT Cruiser 2001

P0605-------- Internal control module read only memory (ROM) Error
Have the computor checked.
P0700-------- Transmission control system
Better take it to a transmission shop and have that checked so they can pinpoint the problem.
1helpful
1answer

My 2002 pt cruiser check engine light came on today i took it to auto zone they hooked up a computer and it came back with 2 codes wrong a p0700 and a p0740 what does this mean and is it expensive to fix

P0700 simply means there is a fault code present in the transmission module (TCM). P0740 Torque converter clutch circuit. This is usually caused by a worn out torque converter clutch which would involve replacing the torque converter and yes it would be expensive to repair if that is the cause. Diagnosis is usually made with a scanner and other equipment.
3helpful
1answer

Codes under P0700 are P0765 and P0760, do this require transmission replacment or can they be isolated and repaired this is for a 2001 pt cruiser, automactic trans with overdrive.

hi checking your spec po700 is your transmission switch carnt find po760 the computer is telling you its a problem with the switch only hope this is helpfull if so please rate it thanks
2helpful
2answers

2001 pt cruiser engine light code P0700/ p1284

well p0700 is a transmission code and the related repair on alldat is a error in tcm module! sounds like a bad computer but i couldn't say unless i tested it myself! sorry for lack of info and the other code was not in the list but there was a 1294 and that is a "target idle not reached" so i would be looking at the throttle body and clean it and make sure nothing is binding and aso vacume leaks throught the motor! good luck
Not finding what you are looking for?

594 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...