Can i use 2003 and up engine - 2008 Chevrolet Suburban

Question edited for clarity.
Question moved to sub category.

Shown in the link. It is in the engine bay. More on the images tab.

https://www.google.com/search?q=2003+Chevy+Impala.+engine+control+module+location

..

I am pretty sure it is an interference engine.

For 2003 Ford Expedition there are 4 different engines:
========================================================================

For Expedition 4.6L engines: Firing Order 1-3-7-2-6-5-4-8



====================================================================
For Frod Expedition 5.4L engines:

Firing order 1-3-7-2-6-5-4-8





==================================================================

Ford Expedition 4.0L engines:

Firing order 1-4-2-5-3-6 ---



===================================================================
For Ford Expedition 6.8L engines:

Firing Order: 1-6-5-10-2-7-3-8-4-9

2003 JEEP LIBERTY 2.4L 4-cyl Engine Code [
Engine Oil Grade 1....API* SAE 5W-30 is preferred.
CAPACITIES:
Engine, with filter..........4.7 liters

2003 JEEP LIBERTY 3.7L 6-cyl Engine Code

Engine Oil Grade 1......API* SAE 5W-30 is preferred.

CAPACITIES:
Engine, with filter..........4.7 liters

Thank you for using fixya and good luck

2003 FORD FOCUS 2.0L 4-cyl Engine Code [3]
Engine Oil Grade 1......API* All TEMPS......SAE 5W-20, Engine, with new oil filter 4.3 liters.
Thank you for using fixya and good luck Oil Drain Plug.....17ft/lbs Torque

2003–06 1zz-FE Engine & 2003 2zz-FE Engine

1. Disconnect the negative battery cable.
   
2. Use a wrench and rotate the belt tensioner clockwise.
   

Use a wrench and rotate the belt tensioner clockwise—2003–06 1ZZ-FE engine and 2003 2ZZ-FE engine

1. With pressure applied to the wrench, and tension relieved from the drive belt, remove the accessory drive belt.
   

To install:

1. Raise and safely support the vehicle.
   
2. Remove the right side lower engine splash shield.
   
3. Properly route and install the accessory drive belt onto the drive pulleys.
   
4. Use a wrench and rotate the belt tensioner clockwise.
   

Use a wrench and rotate the belt tensioner clockwise.

1. With pressure applied to the wrench, install the accessory drive belt.
   
2. With the accessory drive belt installed properly, release the belt tensioner.
   
3. Install the right side lower engine splash shield.
   
4. Connect the negative battery cable. Tighten the battery cable bolt to 11 ft. lbs. (15 Nm).
   

sounds like the motor mounts are bad.. good luck keith...

2003 3.7 Liberty check engine light for crank....what? sensor? You have scanned it?

Engine Heated oxygen and catalyst monitor sensors—2.3L engine