2007 Impala stuck in park and gear override silver button won't work. Can't figure out the problem please help
If your 2007 Impala is stuck in park and the gear override silver button doesn't work, there may be a few potential problems that are causing the problem. Here are some common causes and troubleshooting solutions you can try: Brake light switch: The most common cause of this problem is a faulty brake light switch. The brake light switch is responsible for sending a signal to the shift interlock solenoid to release the shifter when the brake pedal is depressed and can prevent the shifter from releasing if the switch does not operate properly. Make sure your brake lights work by pressing on the brake pedal. If they don't work, it's probably a brake light switch issue that needs to be replaced. Shift Interlock Solenoid: The shift interlock solenoid is a mechanism that prevents the shifter from moving without pressing the brake pedal If the solenoid is faulty or a blown fuse can cause the shifter to go into park. Check the fuse connected to the shift interlock system and replace if necessary. If the fuse is good, the solenoid may need to be replaced. Shift Cable: The shift cable connects the shifter to the transmission and allows you to change gears. Damaged, loose, or misaligned cables can prevent the shifter from leaving the parking space. Inspect the shift cable for any obvious issues and make sure it is securely attached to the shifter and transmission. Shift lock control module: Some vehicles have a shift lock control module that ensures proper operation of the shift interlock system. Malfunction of this module can cause the problem. It may be necessary to use a diagnostic scan tool to check for any error codes associated with the module. Ignition switch: Faulty ignition under certain conditions
×