Question about 1992 Oldsmobile 88
SOURCE: o2 sensor
If you can't access it from from the engine compartment you will need to jack the car up and support it. You need a 7/8 box end wrench. Sometimes it take a special wrench due to the angle not accessable with a strait wrench. Its on the exhaust pipe in front of the cat
Posted on Jul 18, 2009
HI. If your speedometer needle doesn't move, or if it flutters, your speedometer cable may be bad.
To determine if it is the cable, disconnect the cable casing from the transmission and from the back of the speedometer on the instrument panel. Draw the cable out from inside of the casing. The cable looks like a twisted piece or wire. If the cable is broken or if it is dry or brittle. It probably needs to be replaced. If the cable is intact and the same length as the cable casing, the problem is likely the speedometer head.
I would also advise to check the speedometer gear as well.
The speedometer gear is located on the output shaft. Inspect it for damage.
This gear rarely suffers damage because the gear from the speedometer that meshes with it is usually made of a softer material. Sometimes, the speedometer gear on the main-shaft is replaceable. A clip can hold it in place or it can be a pressed fit. A special puller is available to pull these gears on the car.
Posted on Sep 09, 2009
Tips for a great answer:
Dec 23, 2016 | 1997 Oldsmobile 88
Aug 14, 2014 | 1992 Oldsmobile 88
Apr 28, 2014 | 1992 Oldsmobile 88
Apr 14, 2013 | 1992 Oldsmobile Cutlass Ciera
Jan 17, 2011 | 1992 Oldsmobile 88
Jul 05, 2010 | 1994 Oldsmobile Eighty Eight
Feb 21, 2010 | 1997 Oldsmobile 88
Aug 29, 2009 | 1992 Oldsmobile 88
May 17, 2009 | 1992 Oldsmobile Custom Cruiser
134 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: