2008 dodge ram broken wire from metal connector behind fuse box how can i fix it

Bruce Bracey

• 1000 Answers

SOURCE: Factory installed trailer hitch and wiring

The trailer light harness should be live. If you turn the ignition switch to run and set the turn signal on you should be able to use a test light and watch it blink back at the hitch.
The fuse cavity you are looking at is a battery fuse feed for trailer brakes or trailer battery recharge.
Check the pig tail with a test light and let me know.
Regards,

Posted on Mar 08, 2009

SOURCE: Change Dodge Ram tail lights from 2005 to new 2008

I just got a pair of 2008 tail light lens for my 2002 Dodge Ram 1500. If you look under the rear there is a connector that runs up to the tail light. This is a small harness. I believe that all you need to do is purchase the 2008 tail light harness. It looks like it will snap into the bottom of the stock harness and will fit the 2008 lenses.

Posted on Apr 18, 2009

SOURCE: 2003 Dodge Ram 2500 diesel 4x4 wiring diagram

TPIM PROBLEM , MUST HAVE COMPUTER FLASHED AT DEALERSHIP

Posted on Jun 04, 2009

SOURCE: 2006 Dodge Ram 2500 diesel truck----need inside fuse box diagram

If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.

Posted on Sep 26, 2009

Mike Tillman

• 174 Answers

SOURCE: LEFT TRAILER TURN SIGNAL DOES NOT WORK

I have seen once before that the fuse box was bad on a 2003 Dodge 3500. I had power in and nothing out. We had to replace the box. Not cheap! Hope it is simple like a loose connection though. I think I had to pull the inner fender on the drivers side to access the bottom of the fuse box. Pain in the ****, but...

Posted on Oct 01, 2009