The first fault code do you mean p1296 if so that is a cooling system malfunction you will need to check the temperature sensor.
The fault code p0411 is a Secondary Air Injection System Incorrect Flow Detected
And the p0304 fault code is a misfire detected on cylinder 4 possibly a coil pack maybe a plug
SOURCE: diagnostic code po411
The P0410 code refers to the emissions system.
The AIR pump puts air to the
exhaust to lower emissions. It takes in outside air and pumps it through two
one-way check valves into each bank of the exhaust.
About 90% of the time that this code is set, the one-way check valves have
worn out or failed and allow water (which occurs naturally in the exhaust) back
into the pump. In any cold climate, especially in climates with higher humidity,
this water may be more excessive. The water partially fills the AIR pump, it
can then freeze. When the PCM commands the pump on, if the pump is frozen it
cannot turn, thus overloading the circuit and "popping" the fuse.
In here you can find the Trouble Codes List:
The CODE mean P0411 Secondary Air Injection System Incorrect Flow Detected
Good luck!!!
421 views
Usually answered in minutes!
×