1992 Mazda 626 Logo

Related Topics:

Jacob Wieder Posted on Apr 07, 2015

VAF KL02 cleaning? 1992 Mazda 626 V6

How do one disassemble it? or is it not possible...it seems to be glued to one piece

5 Related Answers

Anonymous

  • 726 Answers
  • Posted on Jul 18, 2008

SOURCE: Where is the fuel filter

v6 under neith the car on the side

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 18, 2009

SOURCE: i need the firing order for a mazda 626 v6

go to link below.
http://autorepair.about.com/library/firing_orders/bl-fo-7386.htm

Anonymous

  • 1 Answer
  • Posted on Aug 19, 2009

SOURCE: need picture diagram of a 1999 mazda 626

where is the thermostat on the 1999 mazda 626 i need a diagram... the book shows me a different motor....

Anonymous

  • 7 Answers
  • Posted on Mar 25, 2010

SOURCE: Mazda 626 2000 - warning lights for ABS, TCS

what u do to stop the vehicle and remove the battery head and refix,if the problem still persits go for thorough scanning.

Anonymous

  • 4793 Answers
  • Posted on Oct 01, 2010

SOURCE: 1996 mazda 626 se V6 2.5 firing order south

looking from the front of the engine back towards the gearbox,left bank 135..right bank 246...Firing order 135624.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi I have a 93 2.0 v6 mazda lantis. seems to have power surges when I'm driving(doesn't cut of though) and lack of engine power. any ideas please? ?

run the fault codes.problems may be from faulty sensors in the exhaust system, low fuel pressure, venting problems in the tank,loose connections to the ECM or MAP/MAF/VAF sensor problems
0helpful
1answer

1992 mazda 626 brakes

It sounds like you may have a leaking brake master cylinder. Do not drive this until a technician can confirm my guess as to the problem.
0helpful
1answer

1992 mazda 626 hesitates on acceleration what's

Sounds like a weak fuel pump.Check your fuel pressure it should be 34-40 with key on engine off.
0helpful
1answer

Mazda 626 v6 1992 wont start

Replace the ignition coiil located inside the distributor
0helpful
1answer

Mazda 626 92 v6- engine sputters when revved over 4000rpm and cuts out completly for about 2 seconds when you turn left a bit too fast

Sounds like fuel starvation. You don't say if it is carb or injectors, but sounds like carb. Check the fuel filter, the float level and needle and seat and the main jets for partial blockage. Yu can also check the fuel pump delivery and pressure and the vapour separator.
0helpful
1answer

What is the factory tire size for a Mazda 626

Mazda equips your vehicle with more than one possible size during production.
Please select the size installed on your vehicle from the choices below

tire size one:
tire size two:
185/70-14
195/65-14
0helpful
1answer

Engine problem - 1992 Mazda 626 (V6)

Yes you can purchase a repair manual online if you like from this site, or local parts stores they run about $25.00 or so, and might consider either purchasing a OBDI diagnositc scanner or take it to a shop to save guess work. You can perform several tests to check properly such as compression test wet and dry or simple spark test, fuel pressure test and so forth all of the tests can be found in repair manual.
Not finding what you are looking for?

129 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...