Replaced fuses of the fuses box, (drivers' pedals, right (10A)), when i turn off the engine and let the alarm on they do not work. if i press the right flash while alarm is on, they work. if i let it for too long (5 mins) with alarm and right flash open it will start working. When engine is off, right/left flash doesn't flash, only alarm works. if i start the engine, then both alarm and turn signals flash, but do not repeatedly. Its like the flasher is not working, but if it willl heat up, will work preperly and turn on/off turn signals and alarm.
Go to www.kiatechinfo.com, make an account for free and you can access all the information the factory techs use.
SOURCE: 2000 kia sephia fuse box dirmgram
hi..you can get the diagram from the following
link.
http://images.google.co.in/imgres?imgurl=http://www.bigcee.com/faq/KLR650-color-wiring-diagram.jpg&imgrefurl=http://www.wiring-diagram.com/&usg=__Feaf0TWiqoQBMFEeM3HxCyDYqI4=&h=2400&w=3000&sz=559&hl=en&start=6&um=1&tbnid=n2YR-OYbgOHpZM:&tbnh=120&tbnw=150&prev=/images%3Fq%3D2000%2Bkia%2Bsephia%2Bfuse%2Bbox%2Bdiagram%26ndsp%3D20%26um%3D1%26hl%3Den%26sa%3DN
check it out..
thank u..
rate me..
SOURCE: 2000 kia sephia engine cooling fan not working
well, we have wired the cooling fan up direct before, bypassing the relay switches. maybe this will help on repair costs.
SOURCE: blower motor not getting power
i did the same i think heres a short some where costly to fix i ran a hot wire from the battery to the motor and my switch works fine
SOURCE: 2000 kia sportage pump is working relays have been
there is a splice for fuel injectors at the front of the fuel rail conduit and electric tape will need to be removed to see if it is ok then clean up all engine grounds and ecm grounds on passenger side kick panel if this doesnt help check coils and crank sensor
117 views
Usually answered in minutes!
Anyone?
×