Question about 1987 Dodge Ram Wagon B250
SOURCE: i dont have the diagram
normally the diagram for the fuse box is just inside the lid and my suggestion to you is to stop by a dodge dealer and the parts department would print you off a diagram
Posted on Jan 08, 2009
try all the major auto parts stores,like pepboys,autozone,advanced auto, & if not NAPA. All else fails,try the dealer ,if that fails try ebay.
Posted on Jun 28, 2009
could be fuel filter clogged //fuel pump is going bad which you will need to have a pressure test done ...also is there a gas odor ? could be rusted lines could be air filter ....messing with the timing you should not move to much ...if you have brake /carb choke cleaner try spraying around the intake manifold to see if any change in performance such as lowering the rpm's which would mean a gasket leak are all the Vacuum lines good and not dry-rotted try bending them ans well as spraying with a squirt bottle of water on the plug wires to see if an Arc is present a bad plug wire ..these are a few areas in which i would consider 1st ..hope this helps you
Posted on Dec 03, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Posted on Mar 07, 2010
Tips for a great answer:
Feb 26, 2015 | Dodge Cars & Trucks
Nov 28, 2012 | 1987 Dodge Ram Wagon B250
Sep 22, 2012 | Cars & Trucks
Apr 06, 2011 | 1987 Dodge Ram Wagon B250
Feb 08, 2011 | 1987 Dodge Ram Maxivan
Feb 22, 2010 | 1987 Dodge Ram Wagon B250
Feb 17, 2010 | 1994 Dodge Ram 2500
Jan 12, 2010 | 1987 Dodge Ram Wagon B250
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: