Turn lights
SOURCE: left & right brake light not on
Could be the brake switch that is mounted to the brake pedal area. Check if you have voltage out from there when brakes are applied, there may be two leads one for the high mount and one for regular brake lights.
SOURCE: i have a 2003 Chevrolet Venture after a hard
most part stores will hook the vehicle up for free and tell you the codes that came up when the engine light came on and then if the dont tell you what the codes mean then just google them i would start there
SOURCE: 2003 Chevrolet Venture interior lights will not
Sounds like a door switch has packed up Try pushing them in by hand one by one
SOURCE: 2000 chevrolet venture when lights are one turn
sounds like a short in wire to tail light, remove tail light and check ground first, if still problem then use wire probe and traces wires until u find problem
SOURCE: 1999 chevrolet venture wipersin up position when
You'll want to check the crank arm. It's under a plastic cover on top of the wiper motor and connects to the wiper linkage. When it fails the wipers park in the up position. There is a tab sticking up from the frame that it needs to hit. Make sure this isn't bent. When the crank arm is replaced it needs to be correctly timed. There must be a 4-8mm gap between the tab and crank arm at the innerwipe position.
26 views
Usually answered in minutes!
×