Question about 2008 Chevrolet Suburban LTZ

1 Answer

My stabilitrak and traction control service lights came on today after downpour of rain. My steering wheel spins 360 won't turn wheels

Posted by Leanne Isom on

Ad

1 Answer

flarustler

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Chevrolet Expert
  • 160 Answers

You have had water intrusion into the system. I may correct itself in a few day of good dry weather but this is a safety system and should go to the dealer.

Posted on Jul 06, 2016

Ad

5 Related Answers

Anonymous

  • 61 Answers

SOURCE: chevy steering wheel controls

You first have to disarm and remove the air bag (unscrews with bolts from behind the steering wheel) and then you will see the screws for the switches. Only the silverado awitches will work.

Posted on Jan 29, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: replace lights in steering wheel control 2007

1-Pull the whole control out with a flat screwdriver 2-Twist out the bad light 3- replce with a new micro bulb
You can buy them here http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Finstrument.html

Posted on Aug 30, 2010

ninos_dinkha

  • 1 Answer

SOURCE: On my 2007 Chevy Equinox

i have chevy equinox 2007 LT with AWD system, my problem is that i have two messages appearing in the DIC : satbilitrack and service tracktion control. can u help me with this and tell me whats the problem and how should i fix it?

Posted on Apr 13, 2011

faaque812

John Dillon

  • 108 Answers

SOURCE: How do you turn off

the only way to reset this ABS light is with an OBDII diagnostic tool. You can buy one for around $25-$200 or any technitian would be able to reset it for you and probably not even charge for that. If it come back on after reset, that indicates there is a problem somewhere with the ABS system and it will give a code.
if this was helpful please give it thumbs up to help others.
Good luck

Posted on Jun 07, 2011

limarocshan

  • 1 Answer

SOURCE: how to turn traction control on a 2004 chevy

SERVICE TRACTION CONTROL and NO TRAC light comes on and off. Changed wheel hub and bearings, alignment, brakes, tires...HELP!!!

Posted on Jun 30, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stabilizer traction control light is on, and lost cruise control


Cruise control will always disable itself when any CEL light is present, so that's normal. The Stabilitrak light problem is a known common problem with these. Your steering wheel position sensor needs to be replaced. Mine does it every morning IF my steering wheel wasn't put into a straight position when I parked it. Straighten the tires, turn the ignition off and restart. Light will go out.

Apr 02, 2016 | 2008 GMC Envoy

1 Answer

Traction control problem


Grinding noises when making turns in front wheel drive cars usually is constant velocity joints.

Mar 04, 2016 | Cars & Trucks

1 Answer

Traction control prolbem


Most likely one of your wheel sensors is disconnected, shorted, or simply not registering. All these systems work on measuring wheel rotation. If one or more sensors can't measure wheel rotation, you get a service light.

Mar 03, 2016 | Cars & Trucks

1 Answer

Changed bearings and abs light and stabletrack still on do they reset after u replace the bearings and if so how long


Service Traction Control - Stabilitrak and ABS light, Help - Page ...

chevroletforum.com > ... > Tahoe & Suburban
Aug 16, 2012 - Service Traction Control - Service Stabilitrak and ABS light came on. ... Its supposed to still be under warranty, "Major Guard". ... I replaced my rear shocks with OEM re-manufactured Arnott shocks (great company) and in the ...

SilveradoSierra.com • Traction Control, Stabilitrak & ABS Issue

www.silveradosierra.com/.../traction-control-stabilitrak-abs-issue-t18976...
Jan 28, 2014 - Traction Control, Stabilitrak & ABS Issue. Tue Jan 28 ... The wife and I got in to head out and see my brother and as soon as I turned the key the ServiceTraction Control, Service Stabilitrak messages flashed and the ABS light came on. ... check your wheel bearings my was gone and caused the same thing ...

Chevrolet Impala Questions - Hello. I have a 2012 Chevy ...

www.cargurus.com > Questions > Chevrolet > Impala

CarGurusApr 6, 2013 - Occasionally when I hit the brakes I get a Stabilitrak Error Message " ... I believe GM still had 3 year/ 36,000 mile bumper to bumper ... After about 2 months of intermittent noises the ABS light came on, the service stabilitrak warning, servicetraction ... Edit....left hub bearing change after the right one changed.

Replaced front hub - now ABS/Stabilitrak lights on... - Chevy ...


Dec 12, 2015 | Cars & Trucks

1 Answer

I had a problem with power steering leak . They changed the hoses and pump and reservoir and rack. Now I have stabilitytrac control light on and when you are stopped you can't turn the steering wheel.


Service Stabilitrak, Traction Control lights ON, alone with check ...

chevroletforum.com > ... > Equinox
Jul 9, 2012 - I have a 08 Equinox with 79000 miles on it, for the last few weeks or soI've been having the service traction control/ service stabilitrak light ... HELP - Service Stabilitrak & Service Traction Control - Chevrolet ...
Aug 30, 2011
Service Traction Control - Stabilitrak and ABS light, Help ...
Feb 12, 2011
More results from chevroletforum.com

How To COMPLETELY Disable Traction/Stabilitrack Control ...

? 6:16
https://www.youtube.com/watch?v=TUoV2ue7amY
Jul 7, 2013 - Uploaded by Kyle Riegle
How to completely disable traction control on gm/chevy trucks and suv's. ... I got to anaheim the light of the ...

Has anyone ever had the service stabilitrak, service traction ...



Dec 05, 2015 | Cars & Trucks

1 Answer

I keep getting a message service stabilitrak


StabiliTrak Indicator Light: If the warning light does not come on then, have it fixed so it will be ready to warn you if there is a problem. If it stays on, or comes on when you are driving, there may be a problem with your StabiliTrak system and your vehicle may need service. When this warning light is on, the system is off and will not limit wheel spin. Adjust your driving accordingly.

This light will also flash when the StabiliTrak system is active. If the StabiliTrak system warning light comes on and stays on for an extended period of time when the system is turned on, your vehicle needs service.

The traction control part of StabiliTrak can be turned off by pressing and releasing the StabiliTrak button if both systems (traction control and StabiliTrak) were previously on. To disable both traction control and StabiliTrak, press and hold the button for five seconds.

Traction control and StabiliTrak can be turned on by pressing and releasing the StabiliTrak button if not automatically shut off for any other reason.

When the TCS or StabiliTrak system is turned off, the StabiliTrak light and the appropriate TCS off or StabiliTrak off message will be displayed on the DIC to warn the driver. Your vehicle will still have brake-traction control when traction control is off, but will not be able to use the engine speed management system.

If the StabiliTrak and/or Traction Control are not operating properly, I encourage you to take your vehicle in for inspection. A certified technician will be able to offer a more accurate diagnosis.

Apr 29, 2015 | Cars & Trucks

1 Answer

What is an average cost to service the Stabilitrak System in a 2002 Cadillac Escalde


If the system fails to turn on or activate, the StabiliTrak light along with one of the following messages will be displayed on the Driver Information Center (DIC): TRACTION CONTROL OFF, SERVICE TRACTION CONTROL, STABILITRAK OFF, SERVICE STABILITRAK. If these DIC messages appear, make sure the StabiliTrak system has not been turned off using the StabiliTrak on/off button. Then turn the steering wheel clockwise from the nine o'clock position to the three o'clock position. If this clears the message(s), the vehicle does not need servicing. If this does not clear the message(s), then turn the vehicle off, wait 15 seconds, and then turn it back on again to reset the system. If any of these messages still appear on the DIC, the vehicle should be taken in for service.

Mar 17, 2013 | Cars & Trucks

1 Answer

2011 sonata shifter won't lock into place


Do you have a warranty?If so take it back,it may have a recall.

Dec 18, 2012 | 2011 Hyundai Sonata

4 Answers

My service stabletrack keeps come on how to fix that


Hi there:

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.


Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.


When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.


When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.


You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.


Hope this helps.

Jun 03, 2012 | 2006 Chevrolet Blazer

1 Answer

I have a wrench with a car swerving light up every once in awhile but I have no idea what it means and I have no idea what stabilitrak is


{: ) A car swerving light on the instrument cluster is the StabiTrak indicator, sometimes called the traction control indicator. A wrench beside it tells it requires servicing.

Your vehicle is equipped with StabiliTrak, which combines antilock brake, traction and stability control systems and helps the driver maintain directional control of the vehicle in most driving conditions.
Traction control activates when the controller senses wheel spin. StabiliTrak will selectively apply the brakes and reduce engine torque to help regain traction.
Stability control activates when the controller senses a discrepancy between your intended path and the direction the vehicle is travelling. StabiliTrak selectively applies braking pressure at any one of the vehicle's brakes to help guide the vehicle in the direction which you are steering.
When you first start your vehicle and begin to drive away, the system performs several diagnostic checks to insure there are no problems. You may hear or feel the system working. This is normal and does not mean there is a problem with your vehicle. If driving conditions delay system initialization, the STABILITRAK NOT READY message may be displayed. If this is the case, your vehicle does not need servicing.
When the StabiliTrak system is both on and actively controlling the stability of the vehicle, the StabiliTrak light will blink for the duration of the event.
You may also feel or hear the system working. This is normal.
StabiliTrak will turn off automatically if a problem is detected in the system. The StabiliTrak light will come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the SERVICE STABILITRAK message (or StabiliTrak service light) does not clear itself after restarting the vehicle, you should see your dealer for service.

Jan 25, 2011 | 2006 Chevrolet Trailblazer

Not finding what you are looking for?
2008 Chevrolet Suburban LTZ Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23504 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...