Can I operate a Parrot MK6100 hands free bluetooth without the remote control. I want to remove pairing with my old phone and set it to pair with my Lumia 535

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.
   
   Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.
   
   After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
The Uconnect system is a great way to safely use your cell phone in the car.

problem is with ur bluetooth i thin sir

Go to setting , there you will see add a device and than remove the device . Simply remove all the Bluetooth devices which are or were paired with car's than switch the SUV off and than ON . this is the time to pair your phone again , hopefully it will work .
If it doesn't let me know , I will give you another technique .

About 4,890,000 results (0.54 seconds) Search Results

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing-problems/
Dec 29, 2015 - Determine which pairing process your device employs. ... Let's say you want to pair your phone with your car's infotainment system so you ..... If your tabletdoesn't come with built-in Bluetooth (and it looks like most, if not all, ...

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing...-/CP2/
Dec 29, 2015 - Let's say you want to pair your phone with your car's infotainment system so you can .... i factory reset my tablet and now it wont find my bluetoothspeaker to pair! .... It doesn't look like you can revert to the previous firmware ...

Bluetooth FAQ for Windows Phone ' Windows Phone How ...

www.windowsphone.com/en-us/how-to/.../bluetooth-faq

Windows PhoneRead the Bluetooth FAQ for Windows Phone and get answers to common ... You can pair your phone with a variety of devices that use Bluetooth, such as the hands-free system in your car, headsets, speakers, ... Where can I find it? .... ?My phone doesn't reconnect to the Bluetooth hands-free system when I get in my car.

iPhone 6 not connecting to car Bluetooth ' Apple Support Commu

If you have a Bluetooth u-connect radio and Bluetooth phone it is likely the settings of the phone and car radio are to pair. I expert that during the pairing process and hands free operation the radio sets itself to mute.

Check settings!

Hope this helps?

Hi. There is an option to forget bt devices. Forget all of them. Pair your phone again automatically

make sure that unit is set up to recieve the bluetooth signal from the phone. In some cases there is nothing you can do except get a different phone or a different unit.

jaguar parts dept can supply this very easy, contact the parts dept, they have manuals for what each car needs

The picture Im sending you is the information on your vehicle based on what I can get from General motors tech website to inform you if your intstructions in owners manual are unable to correct your situation.There really no way to quick fix the issue.here is the page information; Before reading note there are unavailable sections or links because it is pasted from a General motors page unavailable to public.
You are looking at a trip to General motors unfortunately unless you can find a shop with a tech 2 scan tool.

Circuit/System Description The Bluetooth ® antenna is a small fixed antenna connected directly to the telematics communication interface control module and is used to send and receive signals from a Bluetooth ® enabled cellular phone. The antenna utilizes no cabling and is not external to the vehicle.
In order to use hands-free calling, the cellular phone must be paired to the vehicle. Up to five devices can be paired to the vehicle at one time, but only one can be connected at any given time. To pair a phone, the customer must know how to operate the Bluetooth ® functionality of their phone. The pairing process must only be done one time for each phone, unless that phone’s information is deleted. For safety reasons, the pairing process is disabled while the vehicle is moving.
Diagnostic Aids • The purpose of this diagnostic is to verify the ability of the telematics communication interface control module to pair to a Bluetooth ® device. • Before performing this test, verify compatibility of the cellular phone(s) the customer is attempting to use with the vehicle. Based on the cellular phone’s service provider and the manufacturer’s implementation of Bluetooth ®, not all phones support all available Bluetooth ® functionality. A vehicle and feature compatibility list will be provided via the GM Bluetooth ® website: http://www.gm.com/vc/bluetooth/ • If the vehicle passes the following tests and a compatible device is being used, the concern may be due to a device malfunction or an incomplete/improper pairing attempt. • A Bluetooth ® test tool or equivalent can also be used to verify the ability of the customers cellular phone(s) to pair with another device. Schematic Reference OnStar Schematics
Connector End View Reference Component Connector End Views
Description and Operation OnStar Description and Operation
Electrical Information Reference • Circuit Testing • Connector Repairs • Testing for Intermittent Conditions and Poor Connections • Wiring Repairs
Scan Tool Reference Control Module References for scan tool information
Circuit/System Verification

1. Verify DTC B2485 is not set.
→ If DTC B2485 is set , refer to DTC B2485
2. Set up a Bluetooth ® test tool or equivalent.
3. Ignition ON, perform the discovery/search operation with the test tool. Verify the vehicle appears in the list of available devices.
→ If the vehicle is not in the list of available devices, repeat the discovery/search operation. If the vehicle is still not in the list of available devices, replace the K73 telematics communication interface control module.
4. Follow the instructions provided in the Vehicle Owners Manual for pairing a device. Verify successful pairing with the test tool.
→ If pairing is not successful, repeat the pairing process. If pairing is still not successful, replace the K73 telematics communication interface control module.
5. Refer to Diagnostic Aids.

Repair Instructions Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for telematics communication interface control module replacement, setup, and programming

i am a vw tech and have found that some phones just wont pair up i have an envy and it pairs up fine with all the ones that wont pair up with customers phones