I recently replaced the broken shifter latch pink thingy and after I finally got the car to shift smoothly, the key wouldn't come out. I have driven the car around and when I got home it simply wouldn't come out.
SOURCE: 2007 Chrysler 300 won't shift
It is the pink park lock out devise. Try here: http://www.custombilletstore.com/product_p/1028.htm
You can purchase the fix and do it yoruself to save cash. Dealer will charge you over $100 to replace the whole area with more cheap plastic.
SOURCE: WONT SHIFT IN TO PARK
Sounds like the shift cable is coming apart inside. You will need to disconnect it at both ends and make sure it slides easily. if not, change it. If you are good with mechanical things and have a bit of patience it's not too hard. If not let a shop do it.
SOURCE: Chrysler 300 won't shift out of park
I had the same problem with my 05. I couldn't shift out of park. So, I checked brake pedal sensor, and wire linkage and they were fine. I took the center console apart and pulled out the shifter assembly and sure enough the problem was at the assembly. There is a plastic piece. that hooks to a small spring that snapped. I ened up renforcing it with a small clamp hose, and ever since its been functioning fine. I imagine I saved my over $500 bucks of repair cost and also wouldn't be surprize for others to have the same problem.
SOURCE: chrysler sebring won't shift out of park
See if this helps. Someone on LXforums had the same problem with their
300. This solution worked for me as I had the same problem as you with
my Chrylser Sebring 2007.
http://www.lxforums.com/board/showthread.php?p=1538277
195 views
Usually answered in minutes!
×