2003 Dodge Neon Logo

Related Topics:

Rick cooper Posted on Mar 13, 2015

03 dodge neon se odometer code says po 127 - 2003 Dodge Neon

5 Related Answers

Anonymous

  • 35 Answers
  • Posted on Feb 10, 2009

SOURCE: putting a 03 4cy motor in a 00 dodge neon

Oh ya you definitely have to have the computer and the complete wiring harness for the new engine. 00-02 was the new body style and new engine in 03 they modified the body style and the engine. IT is a hard transfer but very possible. Good luck

Ad

old fart58

  • 163 Answers
  • Posted on Jun 26, 2009

SOURCE: my 03 dodge neon has jumped time. What do I need

Most mechanics would pull the spark plugs and check the compression in the cylinders, but usually anyone with a trained ear can tell by the sound of the starter when cranking against the compression of each cylinder. Many of the smaller engines today have valving designed so that when they are out of time, the pistons interfere with them. That means two objects try to take up the same space at the same time and at minimum the valves bend. Worse case scenario would be upper head/camshaft damage and possible piston damage. That's pretty severe. You won't know until you get the valve cover off or maybe deeper. Hope that helps.

Anonymous

  • 521 Answers
  • Posted on Jul 18, 2009

SOURCE: 2001 Dodge Neon won't start. says "fuse"

check all you r fuses. There should be 2 sets, one under the hood and another in the passenger area(driver side under dash usually)

Anonymous

  • 1752 Answers
  • Posted on Dec 21, 2009

SOURCE: the speedometer and odometer dont work..can this

Sure, it's probably just a loose or broken speedo cable, it runs from the transmission to the firewall. A mechanic can fix it in minutes.

Bill Boyd

  • 53816 Answers
  • Posted on Mar 13, 2015

SOURCE: I have 2003 dodge neon se odometer code says po 127 I need no what need to do want start or roll over but all lights work

code p0127 refers to intake air temperature (IAT) sensor---too high==causes--wiring short to ground--IAT sensor 2--mechanical fault---ECM

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have 2002 dodge neon se and the turn signals or hazard lights do not blink. on the dash it flashes the word fuse by the odometer reading. Any idea which fuse it could be , basic fuse or master fuse?

This vehicle is 15 years old. I would ask myself is it really worth the time, trouble and money that I am spending?
Take it to a mechanic, an experienced one.
0helpful
1answer

I have 2003 dodge neon se odometer code says po 127 I need no what need to do want start or roll over but all lights work

code p0127 refers to intake air temperature (IAT) sensor---too high==causes--wiring short to ground--IAT sensor 2--mechanical fault---ECM
0helpful
1answer

Why don't any of the dashboard dials on my 2002 dodge neon work? (speedometer, rpm, odometer, etc)

run the fault codes and look for a TCM problem as they are all controlled by this module.
4helpful
1answer

The odometer and RPM gauge on 03 SXT are stuck. They went 360 back

Try this, it works on other Chrysler products.

Insert key and turn to run position. put odometer on the trip position. turn key off.

While holding trip meter reset button in, turn key to run position ( dash lights will be on ) release trip meter reset button and watch the gauge cluster go through a test cycle.

After this cycle the gauges should return back to normal.

Hope this works for you.
0helpful
1answer

The speedometer and odometer dont work..can this

Sure, it's probably just a loose or broken speedo cable, it runs from the transmission to the firewall. A mechanic can fix it in minutes.
1helpful
2answers
2helpful
1answer

"done" on the odometer?

If you turn the key on and off on a dodge 3 times in a row, they will give you trouble codes in the odometer area. After all the codes are displayed or if there are no codes it will say (done). There shouldn't be anything wrong with your car, it was just in diagnostic mode.
0helpful
1answer

Putting a 03 4cy motor in a 00 dodge neon

Oh ya you definitely have to have the computer and the complete wiring harness for the new engine. 00-02 was the new body style and new engine in 03 they modified the body style and the engine. IT is a hard transfer but very possible. Good luck
Not finding what you are looking for?

32 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...