Before replacing the coil , to make sure that's what's wrong ,switch it to another cylinder to see if the problem moves to that cylinder ! This DTC is for a circuit control problem ,
DTC P0353: Ignition Coil 3 Control Circuit
I have seen lose wire connections cause misfires , there is a four wire connector at the coil marked A,B,C,D . C is L-BU that is the control wire from the PCM - engine computer . So basically it's saying there is a problem with that circuit !
The ignition system uses individual ignition coil/module assemblies for each cylinder. The engine control module (ECM) controls the individual coils by transmitting timing pulses on the ignition control (IC) circuit of each ignition coil/module to enable a spark event. The ECM monitors each IC circuit for improper voltage levels. Each ignition coil/module has the following circuits:
?€¢
Ignition voltage
?€¢
Ground
?€¢
IC
?€¢
Low reference
But change the coil to a different cylinder an see if the problem moves to that cylinder !
I I
×