THE CAR IS RUNNING BUT HAS THE CODE PO303. WHAT SHOULD BE THE CAUSE ?
If the fans didn't run any further the engine continues to warm and possible seizure will occur. This is also the reason you will probably go through batteries in the long run. Hopefully this helps the issue you are having.
SOURCE: 2004 mazda MPv Where is the location of cyl. #6?
The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.
SOURCE: I get code p0106 on my mazda mpv 2000 can anyone
p0106 means:
manifold absolute/barometric pressure out of range
which is something in the EGR circut. Could be as simple as a vacuum line or a clogged hose or valve.
SOURCE: how do I replace alternator in mazda mpv 2000?
Typically an alternator is an easy fix. It requires removal of the belt from the engine running it, and a few bolts that attach it to the engine.
Because of the engineering with the 2000 mpv, it is a very difficult fix, and one that requires removal of the transaxle and exhaust manifold, as well as removal of the lower engine mounts. It will take a qualified Mazda mechanic 3.5 hours to do the fix - you can (at least) triple that amount of time as a DIY project (assuming you have the right tools).
SOURCE: where is iat sensor located on 2000 mazda mpv van
the IAT sensor is part of the Mass Airflow sensor. here is a picture of that sensor.
Testimonial: "nobody where i lived could tell me this so thank you emissionwiz"
61 views
Usually answered in minutes!
×