My 2006 colorado wont star after changing transmission

SOURCE: 2004 Colorado Will not Start

Put your key in turn it on dont start wait 10mins take key out wait 10seconds repeat 3 times total 30mins. If that dont work try another key

SOURCE: my 2006 chevy colorado wont start

How do headlight shine? (hard to tell in sunshine)

How does horn sound? Weak battery usually means a sick horn.

Can you jump start the vehicle? If so, then it is the battery/alternator, drive it to a auto parts store, most will check out the system for free.

If not the battery, and you here a clicking noise from around the starter area, likely is the starter or the solenoid for the starter.

Greg Bernett

• 2993 Answers
• Posted on Sep 03, 2009

SOURCE: how do i change out the knock sensor on a 2006 chevy colorado

You didn't list your engine size so please pick the applicable to your motor size:

Removal & Installation 2.8L & 2.9L Engines To Remove:

1. Lift the vehicle high enough to gain access to the knock sensor (KS) through the left front wheelhouse.
2. Remove the left front wheel and wheelhouse liner.

1. Disconnect the knock sensor (KS) connector.
2. Detach the knock sensor (KS) from the engine block.

1. Attach the knock sensor (KS) to the engine block.
   • Tighten the bolt to 18 ft lbs (25 Nm).
2. Connect the knock sensor (KS) connector.
3. Install the left front wheelhouse liner and wheel.
4. Fully lower the vehicle.

SOURCE: 2006 colorado intermittently fails to start. It

Clean all the electrical connections you can get to under the hood with automotive electronics cleaner,dry with compressed air and pack each connector with di-electric grease.

SOURCE: my 2006 chevy colorado is making a clicking sound and won't turn over

Your Main Battery is Flat, get a jump start if its safe or remove the battery and hook it up to a charger. Maybe you left your lights on, or your alternator isnt charging the battery properly when your driving around. Sometimes this can be the bushes located in the alternator.