DVD player flashing 2 bright white lights on left side of player even when car is turned off t continues to flash how do I stop it
Mine did that because it was broken. I got one from a junk yard and replaced it but there are many places on the internet that rebuild them Chrysler Pacifica 2004 2008 Radio AM FM mp3 CD DVD Player REV Part...
SOURCE: trouble code (MIL) reset
just 10 flashes means that the OBD readiness monitors have not all been set.. when the battery was disconnected it reset the monitor status to not ready..
SOURCE: Perform Service Light comes on
This is a setting that can be reset to 2000 miles - when it counts down to 0 you get the "Perform Service" alert. I believe if you use the Step function you will see "XX miles to Service" Use the reset button to set this back to 2000.
SOURCE: 2006 Chrysler Pacifica touring abs light on stays on
Hi. this light is a warning that concerns the ABS sensor and mechanism assembly. there is a central module and connecting sensors that are attached to each axle/rotor. If any of the sensors become unstable or starts to malfunction, the main module will detect this anomaly and it will trip the light via, the ECM.
I recommend taking this vehicle in so that the ABS techs can diagnosis this issue and they can pin point which sensor or mechanism is malfunctioning.
You vehicle seems to operate in a normal manner at this point but, you will actually have to be in a hard braking situation in order to experience this malfunctions results. If you where to initiate a hard brake while the ABS system is in safe mode(light on), your vehicle would simply lock up. It would not provide the ABS actions due to this malfunction that is evident at this point.
Please rate and god bless:)
SOURCE: Headlights shut off when I turn on the brights.
The brights are also the daytime running lights. Puts lots of hours on the brights and they probably were burned out by that.
SOURCE: The ABS light is on my 2006 Chrsyler Pacifica Touring
Each wheel has an ABS Speed Sensor. The connectors for each of these is located in the wheel wells. The rears are up behind attached to the inside storage compartment in the wheel well and the front ones are located behind the plastic mud gaurd behind the shock. You have to pull the black plastic christmas tree holder out to get to them. There is a red safety clip on them that you have to move. I put an OHM meter on mine and they all checked at 558. I'm experiencing the same problem and have to start looking at a different problem now.
Hope that helps for your first go around of troubleshooting.
5d4c6677-07a9-41f4-8476-13b87caf5d72
1.03.01
569 views
Usually answered in minutes!
×