Question about 2000 Nissan Frontier

1 Answer

Remove a fuel filter

2 w/d 4cylinder

Posted by Anonymous on

  • 1 more comment 
  • gbob59 Mar 04, 2015

    Hi matt stevens, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

  • Anonymous Mar 04, 2015

    is the fuel filter in-line? is it gonna be back near the rear close to the fuel tank? will it have a shield around it that i will need to remove as well?

  • ricebike Mar 04, 2015

    https://www.youtube.com/watch?v=L7rkvt0J...

×

Ad

1 Answer

ricebike

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 42 Answers

Http://www.nicoclub.com/FSM/Frontier/2000.0_Frontier-KA/ma.pdf

scroll down to MA-14

you don't have to relieve fuel pressure if you had your vehicle sitting overnight ; if you're scared about fuel pressure, then follow the manaual by removing the fuel pump fuse and cranking the truck over a few times.

make sure you use new Fuel Injection hose clamps, not regular worm gear hose clamps

ok, the factory service manual linked doesn't really give you where it is; from google search

it's on the frame rail on the passenger side near rear tire area

there may be a fuel filter shield in the way, unbolt that first...to make it easier to handle the hose clamps

use penetrating oil at the bolts first so you won't break the bolts/ nuts if they're too rusty looking

the following video is for a 2003 model, but it should be similar


his description on that youtube link for changing it every 5k is OVERKILL! i changed my filter for a similar nissan van at 40K and it was still good; just did it for preventative-maintenance

Posted on Mar 04, 2015

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Location of throttle position sensor and how to replace it 1997 toyota camry 2.2 4cylinder


Hello

At the point where the air intake hose is connected to the engine is a part called the "throttle body". the TPS is attached to the outside of the throttle body. See picture below.

7_6_2012_12_35_38_am.jpg

Jul 05, 2012 | 1997 Toyota Camry

1 Answer

I have changed the sparkplugs and bogy cords and the firing module but the golf still wount start.there is spark and gas.the engine turnes but wount start.


Gonna have to do a compression test next, also it wouldn't hurt to do a cylinder leak down test. Let me know if you need help with any of these tests.
Compression pressures;

1.8l 4cylinder 90+PSI min 176PSI MAX
2.l 4cylinder 88PSI min 150MAX
2.3l VR6 95psi min 190 MAX

Jul 16, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

I need a diagram of the bracket positions & mounting of the Power Steering pump for a 1989 Dodge Dakota 2wd - 4cylinder 2.5


Yes there is complete guide available for power steering pump and bracket positions mounting.Its will all details and diagram and lot more details.Please click on link below.Check the details http://technoanswers.blogspot.com/2011/03/1989-dodge-dakota-2wd-4cylinder-25.html ------------------ In this link is complete guide for steering and suspension of 1989 Dodge Dakota 2wd - 4cylinder 2.5------------------ This should help. Thanks.Helpmech.

Mar 29, 2011 | 1989 Dodge Dakota 2WD

1 Answer

Install fuel pump,1995 vw 2.0 litre 4cylinder


Is it a 1995 or a 1996, it can't be both.

Jun 27, 2017 | 1997 Volkswagen Eurovan

2 Answers

Rebuilding 4cylinder Camry.


For the piston to have touched the crank something is really wrong, worn pin in the piston, extremely worn rod, or bent rod. You need a competent machine shop to check everything and have your crank machined to fit the new bearings.

Jan 09, 2010 | 2000 Toyota Camry

1 Answer

Why does my cj7 choke out in water


get a snorkel if intake is submerged under water

Jan 17, 2009 | 1985 Jeep CJ7

1 Answer

Wher is #4cylinder on a 2004 madza6 with a v6


your cylnders zig zag, so it wiould be like this.

1 3 5
2 4 6

this is from the passenger side to the drivers side.

Nov 20, 2008 | 2003 Mazda MPV

1 Answer

Timing marks needed for 2000 camry 2.2 4cylinder


There are marks on the shafts, and marks on the housing... they need to face eachother. The marks on the shaft should point at the ground, if the engine is in the car.

Oct 14, 2008 | 2000 Toyota Camry

1 Answer

Chevy cavalier need torque specs for 4cylinder heads


What torque specs and what engine/trans combo?

Jul 14, 2008 | 1989 Chevrolet Cavalier

Not finding what you are looking for?
2000 Nissan Frontier Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...