Where is the flasher hazard on infiniti q45 1997 turnsignal and hazards stoped working cant find where to put new black square 12v fuse in at

SOURCE: 2002 Workhorse chassis RV hazard flasher doesn't work

I am looking for a locking gas cap for my 2005 Bounder 36Z. This motorhome has a Workhorse chassis. Can you help me locate the part number and a dealer near Newberg, Oregon?

Thank you.

Sharon Bladow
503 554-1281

SOURCE: 95 geo Flashers

It's probably a blinker relay. If you can find one, it'll probably be remanufactured or from a junkyard. Take it to the mechanic.

Bruce Bracey

• 1000 Answers
• Posted on Apr 08, 2009

SOURCE: Turn Sigal wont work and headlights dim

You will need to use a test light to verify voltage at the turn signal flasher.
Turn the key on to the run position, car does not need to be started.
Set the turn signal switch to right or left turn, doesn't matter.
Probe the "purple" wire terminal at the flasher unit. If the turn signal switch is working properly, you will have voltage at the flasher unit.
If you do not have voltage, the switch may be the problem, make certain all connectors to the steering column are fully seated and there are no broken wires.
Good luck and let me know.
Regards,

SOURCE: where is the turnsignal flasher & hazard flasher on this jeep

I believe both are located on the fuse block, driver side of steering column.

SOURCE: 2000 Dodge Ram - No hazard flashers

Possibly blew out the hazard flasher unit. Check the flasher unit (usually there are 2, one for directionals and one for flashers).