Question about 2001 Jaguar S-Type
The boot lid light on the dashboard will not go out and when I put the alarm on the alarm will not set armed, the alarm will go off every time
The switch for the boot open light is on the boot just to the right of center with a rubber cover on it the trim on the bottom of the trunk openingis where it hits to turn it off if trim is missing or broken the light will not go off hope this is of some help
Posted on Mar 01, 2015
SOURCE: Unlocking Boot lid
I am assuming your problem is similar to mine; the key fob isn't dead, but for some reason the boot won't release. This happens rarely, but can be very frustrating (and embarrassing)!
When neither the key fob nor the release on the boot work, lock and unlock the car, and insert the key into the ignition. Turn the key to the second stage, i.e. the accessories are powered, and then remove the key. This ought to allow you to use the fob again.
Posted on Feb 11, 2009
The DSC light stands for Dynamic Skid Control or in lawmen's terms Traction Control. If the light stays on you have a problem with this system. You will need to have it diagnosed by someone who has the tools and expertise to find the problem. More than likely you are going to have to take it to a Jaguar dealer.
Posted on Jan 27, 2010
Testimonial: "thankyou for your help."
your traction control mechanism uses the abs breaks to slow the spinning and give you better traction. i'm thinking your traction control sensor has gone bad
Posted on Mar 15, 2010
FULLY PRESS THE BUTTON THAT SAYS MODE AND THE CLOCK WILL FLASH PUT 24HR AND TYPE IN THE TIME THEN PRESS MODE AND WILL RESET
Posted on May 01, 2010
Tips for a great answer:
Mar 01, 2015 | 2001 Jaguar S-Type
Mar 01, 2015 | Jaguar Cars & Trucks
Feb 28, 2015 | Jaguar S-Type Cars & Trucks
Dec 17, 2010 | 2003 Saab 9-3
Nov 06, 2010 | 1999 Mercury Tracer
Jan 06, 2010 | 2005 Audi A4
Oct 07, 2017 | 2000 Volvo S80
Nov 06, 2008 | 1998 Honda Accord
Jul 07, 2008 | 1998 Toyota Corolla
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: