Question about 2008 Cadillac Dts
Replacing front turn signal bulb
wow i feel sorry for you because Cadillac designed this bulb to be a don't get to bulb but OK here's what you do take the bottom cover off or skid plastic panel under neath the front end theirs little plastic clips holding it on just get come dikes and don't cut them but just use it to help pull them out. after you get that off use a flash light and locate your light housing you should see two screws holding the house in i think those screws are 8mm i cant remember remove those two screws and be careful the metal from the bumper cuts you pull the light housing out and remove all the screws around the housing and open the housing up replace the bulb and make sure your contact to the bulbs clean and then reassemble the way you took apart. if you cant get it well then best bet is take it somewhere i know Cadillac charges an arm and a leg so you can go somewhere else.
Posted on Jan 25, 2009
Actually no you don't. Crank your steering wheel all the way to the right so yo have the maxumum clearance for your hands and arms in the front of the wheel well. Remove the plastic clips that hold the wheel well splash guard and pull it back enough to allow access to the interior of your bumper.
Replace bulbs as needed.
Yes, a jack is nice and makes it a touch easier to access, but I did this in an AutoZone parking lot during a cross country road trip.
5 mins tops to complete.
Posted on Mar 14, 2010
that's a tough one to do. Requires unscrewing bolts underneath the car to remove the entire lense assembly. Best left to a professional or a lot of time (1 or 2 hours) to undo everything and put it back.
Posted on Jul 02, 2010
Tips for a great answer:
Mar 01, 2016 | 2008 Cadillac Dts
on Dec 02, 2009 | Cadillac SRX Cars & Trucks
Mar 04, 2013 | 2004 Cadillac SRX
Jul 09, 2012 | 2006 Cadillac SRX
Mar 26, 2012 | 2006 Cadillac SRX
Mar 11, 2010 | 1991 Cadillac DeVille
Feb 19, 2010 | 2004 Cadillac CTS
Jun 09, 2009 | 1990 Cadillac Deville
Nov 12, 2008 | 2006 Cadillac SRX
499 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: