- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How old is this Carb. 1b, 2b, or 4b? Look around the base where it bolts to the intake manifold and there should be a nipple with a tiny needle size hole, there maybe several & check all sides. Check the manifold as well. We used to cap these off to isolate a problem with the engine by using a short piece of rubber tubing with a sheet metal screw stuck in the end. There are ways to search for a vacuum leak with engine running and wd40....it will temporarily block the leak or be consumed and the engine will speed up,,, but you must be careful, safety first.. https://www.youtube.com/watch?v=5AqQER2J69I
Standing in front of the car, the lower left vacuum port on the carb goes to the distributor. The upper left port goes to the vacuum switch for the secondaries. The brake booster screws into the rear base of the carburator. The transmission kickdown plugs into a nipple on the rear of the intake manifold.
Emission control system-1990-92 4A-FE 2WD California and 4WD - Zoom Image link HERE
Also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Hi there: I suggest check THIS IMAGE LINK about the vaccum diagram on 2TC engine.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
The main vacuum line from a vacuum source on the intake goes to the multi-hose valve on the top and the distributor vacuum advance.This multi-valve switching valve is the main connection to the other vacuum hoses on mine. Two lines come in from a vacuum source and thre go out to three components according to tempature. On mine the middle one off to side 1)goes to choke opener and switching vacumm valves mounted on the fenders the other middle one 2)second from top goes to another choke opener and EGR Valve and EGRModulator. The bottom hose connection is on when cold 3)and goes to a part on the carburator to help it run better when warming up a AAP valve.
There is a check valve diaprham thing inline to the EGR vlave on the second line from top.
I have another vacuum line on the drivers side of the carburator that has a check vlave inline but larger it goes to the throttle linkage to help slow the closing of the trottle on rapid deceleration.
×