How to fix p1382

The reason of Daewoo P1382 OBD-II Engine Trouble Code is P1382 Variable Cam Timing Solenoid 1 Circuit Malfunction.

triple posted and not triple answered, back up and see the others.
hark there it is.

P1382 HONDA - Cylinder Position Sensor 1 No Signal

Possible causes
- Cylinder Position Sensor harness is open or shorted
- Cylinder Position Sensor circuit poor electrical connection
- Faulty Cylinder Position Sensor

its seems to me like cam position ( cmp ) sensor has no signal

You timing belt is still off the mark. your fix is to replace the timing belt and the tensioner there is no other way they are known as interference engine so a replaced timing belt is the only option

Thanks for choosing FixYa and welcome to the site. When it wants to die, is it at high rpm or low rpm? Also, how long did you have this problem please?

Yes, timing belts should be replaced at about 60,000 miles. Some engines will be damaged if the timing belt breaks. Here is a link with more information.

http://www.allpar.com/fix/timing-belt-22.html

YOUR CRANKSHAFT POSITION SENSOR TOP DEAD CENTER AND CYLINDER POSITION SENSORS IS THREE SEPERATE SENSORS BUILT IN THE DISTRIBUTOR.

I want to know how to set point

usually a good time to change it is at about 100,000 miles. change it before it becomes a must or not ride(type of thing). if your water pump is run by your timing belt, then yes you should change the water pump when you do the timing belt. the tension from the new belt will sooner than later kill the bearing in the old water pump and it will cost you twice to fix it versus the one time fix. when you go in to the shop there should be no additional cost to replace the timing belt because it has to come off to replace the water pump.