SOURCE: 2005 Honda CRV dome light goes out, but not burned out
Without seeing it, I would guess that you have a problem with clean contacts. Especially in cars with smokers, the contacts of something like a fuse or a light bulb can become corroded just enough to stop the light from working. Wiggling it scrapes away the debris and allows for contact. I suggest that you take some steel wool and lightly scrub the contact points on both the light and the fixture. **Be sure to have all the doors closed so you dont short out the steel wool.** If you are concerned with the abrasive nature of the steel wool, a pencil eraser will sometimes work just as well. Either way, it just sounds dirty which is par for any car. Good luck!
SOURCE: 2003 honda crv. how do i remove light bulb cover
you have to go under the bumper and and look behind then look for the back of the lightbalb connection. if you see that. pull on it carefully. if rusted, spray some wd forty on it but make sure you dont get the wires with the wd forty
SOURCE: how to remove interior dome light cover to install
use a very thin bladed flathead screwdriver around each edge, gently prying until it pops free. it will snap right back in place when you're done.
227 views
Usually answered in minutes!
×