At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure battery has a full charge. Did you check primary voltage to ignition coil, engine cranking, dark green wire with orange tracer? Use a test light, is it hot? The voltage comes from asd relay, check voltage and ground circuits. The load side of relay is that line with arrowhead, that circuit is fuse protected and hot all the time. The control side of relay is the left side in diagram, has to have voltage and ground. The voltage appears to come from ignition switch on or cranking. Grounded by computer.
The distributor has a sensor in it that sends rpm signal to computer, w/o that signal the computer won't ground the asd relay and you get nothing. The asd relay sends voltage to several systems. Just my opinion. Any applicable trouble codes?
Greg, you may have to transfer everything from donor truck to make the swap work tranny , computers, wire harness, fuse/relay center etc. Check the attached links,forum for Dakota engine swaps,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." engine swap 4 7 to 5 2 or 5 9 Dodge Dakota Forum Custom Dakota Truck Forums
? 8:10
https://www.youtube.com/watch?v=a-rfAd0YLg0
Jun 29, 2014 - Uploaded by AJ Pierce
In this video, I will show you how I fixed my 1992 Dodge Dakotanot starting. ... Engine cranks but won't start - Duration: 18:30. jimthecarguy ...
Engine Will Not Start Due to Blown Door Lock Fuse on Dodge Dakota ... cap and rotor, wires, plugs, coil, fuel pump assy, coil pickup sensor, crank position sensor and have new ECM on the way, Cranks but won't fire. ... 1990 Dodge Dakota.
Jan 22, 2009 - have a 1993 dodge dakota sport that wont start. when you turn the key on there is no power to the fuel pump and does not fire. any ideas ... I just bought a1990 Dodge Dakota Sport 4x4 5-Speed, there is only one problem, it only .... I went to move it the other day, it would turn over, but had no spark or gas.
Q: When you turn the key, it click but no start? A: Starter has Bad contact. Replace new starter. Q: When you turn the key, it crank but no fired ? A: Check for spark and fuel.
Does it crank or not? If no crank then look at the starter or ignition switch. If crank but no start then look at the ignition system. Check for spark at the plugs and also check the fuel pressure. If there is spark try spraying a little starting fluid into the intake. See if it starts and stays running. If it stays running reply back and I will explain why.
it is the relay that supplies power to fuel pump relay coil etc.the computer controls it so if engine stalls all fuel and ign is shut down. mainly was created for safety in an accident
×