How-do-i-remove-the-rear-bumper-from-a-1993-ford-aerostar

Google that and there should be a you tube video that shows you exactly how to do it!

Unbolt it

Its easier if you get the $6 harness piece and attach it to the stereo harness and plug it in. Than to splice the wires on there. But here is the wiring color codes http://www.the12volt.com/installbay/stereodetail/795.html

go to motorcraft.com, pro center, tech info.

it has both a fuel pump in the gas tank and the injectors in the engine...i own a 1993 forrd aerostar and replace the fuel filter, and fuel pump thats how I know...

U REMOVE THE SHOES AND REPLACE THEM ONE WHEEL AT A TIME, THEN USE THE OTHER WHEEL AS A GUIDE TO PUT THEM BACK TOGETHER, REMEMBER THE LONGEST BRAKE SHOE GOES TO THE REAR.

step one is 22 ft lbs.
step two is 52 ft lbs
step #3 is turn an additional 90 degrees. sart in the middle and work your way out going top tobottom, good luck.

Junk yards are wonderful for cosmetic parts. Especially on a van known for having transmission problems. Should be plentiful.

The bumper itself is a metal bar beneath the cover. You will have to access the underneath of the vehicle and remove the bolts holding the bracket for the bumper. Depending on the model make sure any light are disconnected first. Once the bumper is off you can remove the bumper cover and replace new bumper support

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

ford manual with diagrams

in pdf