Cars & Trucks Logo

Related Topics:

Posted on Jul 07, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

02 navigator misfire #7 cyl still after i changed plugs and coil

My check engine light came on so i took it in to the auto parts store and got it scaned they said it was a misfire on cylinder 7 i havent had a tune up so i changed out all the spark plugs the check light came back on after about 30 miles took it back they said #7 misfire again so i got a coil pack and boot and again light came back on and was #7 misfire again took it all apart checked everything i dont see a problem but still got check light and rough idle scan says #7 misfire whats next 2002 lincoln navigator

  • vence_jeffer Jul 07, 2009

    I didnt see any thing on the #7 plug or any plug but some yellowing at the base of the porcilin looked clean it only got 60k miles kind of worries me how does the computer determin a misfire on a certian cyl what sensor it use? i can feel a miss or rough idle could it be a injector? or would that be a diff code on the scaner

×

1 Answer

Andy

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 90 Answers
  • Posted on Jul 07, 2009
Andy
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Dec 29, 2008
Answers
90
Questions
0
Helped
66823
Points
239

You've tried everything but getting the timing checked out. You've done all the other parts of a tune-up but that.

When you changed the spark plugs did you notice #7 was especially dirty or greasy, this could point to a seal being broken or a piston ring that needs replacing.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

02 Toyota Tacoma when engine warms up cylinder 3 has a misfire po303

check spark plug of the cyl. switch plug with another cyl, run engine until warm to see if misfire still comes on. if it stays on the same cyl. fault could be high tension wire or coil or worse leaky valve or rings. if misfire switched to the other cyl just change plug or better replace all plugs
2helpful
1answer

97 ford taurus: Cylinder 2 misfire

well..fuel injection systems are more than the electronic part. I suspect you are dealing with compression or injector fouling issues..
0helpful
1answer

2010 Accent Misfiring

I had a similar problem. It turned out that one of the spark plug wires was routed wrong, The maybe one of the problems
0helpful
1answer

Multiple cylinder misfire

You need a repair shop with the knowledge &
proper tools to work on vehicles

All this free code reading at a parts store won't
help you

You have no factory diagnostic manuals or professional
test equip to work with

You figure it out
1helpful
1answer

Check engine light flashing misfire on # 7 cyl

wat was the compression? if good try doing a leak down test on that cylinder n compare to other cylinders.
1helpful
1answer

My sisters 01 town&country engine light comes on auto store says #5 miss fire so changed all plugs they looked good has new wires nd since only one cylinder miss fire auto store says its mostlikely not...

An auto parts store does not give out advise

They are parts counter sales people-- not mechanics

Spark plugs seldom fail in your lifetime, so you need to
check for vacuum leaks at O2 Sensors,Exhaust leaks,Vacuum leaks
in inlet ducting ,pcv vacuum leaks,egr system issues

Check & listen to hear if injector all click & have same resistance

An OBD Codes for a cylinder doesn't have to be correct

You have mechanical integrity also

You don't have the tools to test as needed I don't suspect
or you could check cyl contribution,fuel trim,fuel press,cyl misfire
counts,O2 switching times,etc
0helpful
1answer

2001 f150 v8 #7cyl. misfire, WTF!

PO-307 COP Ignition Coil -Cyl #7

$59.00 at auto part store

Driver side, third cyl/coil from front of engine,is #7

Remove coil cover,one screw on coil.

1-2-3-4 Pass Side
5-6-7-8 Driver Side
0helpful
1answer

2000 Jeep GCL 4.0L

Try changing spark plug wires and have the fuel pump checked out and check fuel filters and fuel line to see if that is your problem.
1helpful
3answers

Misfire still after plug boot and coil?? 02 Navigator

you most likely have a problem with you cylinder head. Very costly job, but it needs to be replaced. You can find a machine shop who will realign the heads and
Not finding what you are looking for?

1,633 views

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...