Question about 1994 Acura Legend
SOURCE: acura legend
you might have a bad fuel pump, try to keep it runing with barke parts cleanerr or carburetor cleaner aplyed to intake and if stays runing then you need a fuel pump, or have some one check your fuel presure, feed back will be apreciated
Posted on May 28, 2008
IT IS LOCATED BEHIND THE GLOVEBOX. JUMP THE CONNECTOR AND COUNT THE FLASHES OF THE CHECK ENGINE LIGHT. HOPE THIS HELPS, LET ME KNOW. BEST OF LUCK TO YOU.
Posted on Apr 30, 2009
Follow the battery wire (disconnected) to the starter and remove the nut and solenoid wire. There should be two bolts to the bellhousing (a old term for the transmission to engine piece).
Posted on Sep 09, 2009
contact acura or toyota , have your vin# handiy
they can give you the code and how to enter it
i assume you had a dead battery at some point?
Posted on Nov 22, 2009
Testimonial: "Thanks Bud"
Well, it just unbolts, remove fluid line and replace the unit.
What is very important is to "bench bleed" all of the air before mounting unit. parts stores have easy bleeding kits that essentially reroute the output from the unit, directly back to the reservoir. if you do not pre bleed, you may die before you ever get it working...
Posted on May 24, 2010
Tips for a great answer:
Apr 14, 2013 | 1992 Acura Legend
Jul 28, 2012 | 1994 Acura Legend
Aug 23, 2010 | 1993 Acura Legend
Jul 29, 2010 | 1992 Acura Legend
Apr 18, 2010 | 1991 Acura Legend
Feb 02, 2009 | 1993 Acura Legend
Feb 20, 2015 | 1994 Acura Legend
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: