Reset alarm codes on a 2008 Ford Escape after replacing a battery

Question edited for clarity.

Ford Escape (2008-2012) fuses and relays

https://fuse-box.info > ford > ford-escape-2008-2012-f...
Here you will find fuse box diagrams of Ford Escape 2008, 2009, 2010, 2011 and ... 35, 10 A*, Reverse lamp relay, Speed control module, Rear defrost relay.

2012 Ford Escape Fuse Diagram - Rick's Free Auto Repair ...

https://ricksfreeautorepairadvice.com > ... > Fuses > Ford
Apr 9, 2019 - However, Alldatadiy.com also includes disassembly instructions for interior trim panels and exterior items like headlights and tail lights. If ...

2012 Ford Escape fuse box diagram - StartMyCar

https://www.startmycar.com > Escape > Fuse box
The 2012 Ford Escape has 2 different fuse boxes: ... Brake Shift Interlock (BSI), Passenger compartment fuse panel. Fuse MINI ... Turn signals, Stop lamps.

See the link

How to Reset Oil Light Ford Escape 2007 2008 2009 2010 2011 2012

Book and manufacturer both say it is a flat type 10 mm.

I would look on an official site that will tell you what and why about all those fun little warning lights. Sometimes, the same light comes on for different reasons. I've had to do that myself. The only other thing I can think it might be is that you might need to reset it. My Buick Century has the same problem. Look in your owners manual. It should tell you what you need to do. I hope this helps!

just telling you it is time to service your engine for tuneup and oil change as well as new coolant

Turn the ignition key on but do start the engine and push the gas pedal to the floor 3 times within 5 seconds.Usally that will reset it.

Disconnect the battery for 30 mint and see if this fix the problem , let me know .

Doing some checking this is an issue with the HV battery and its normal operating temperature range where the temperature range is exceeded or an issue with the HVBT climate control system having a failure. You will need to take this to the dealer and have them run codes and to look at the temperature blend door actuator as well.

to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !