Question about 2006 Dodge Durango
Ive researched on line resources to locate liftgate switch before attempting to test anything. I still unsure as to its location.
Tips for a great answer:
Dec 13, 2015 | Dodge Cars & Trucks
The liftgate lamps
The courtesy lamp supply voltage circuit of the body control module (BCM) supplies battery positive voltage to the dome lamp, the liftgate lamps, and the map lamps. When any door is opened, the door jamb switch contacts close providing a door open input to the BCM. The BCM then provides a ground to the interior lamps with the switch in the AUTO position. The interior lamps receive a ground at G401 with the switch in the ON position.
Important: If the liftgate is opened after all the modules go to sleep, the dome light will not come on. The liftgate ajar switch input to the BCM will not wake up the BCM once it has gone to sleep, so the dome light will not come on. Once the BCM gets an input to wake it up, from remote keyless entry (RKE) or a door handle, the dome light will turn on when the liftgate is opened.
If the driver inadvertently leaves any interior lamp ON, the BCM will turn it OFF after a 20 minute time-out.
The courtesy lamps will turn OFF immediately if the ignition switch is turned to the ON position or approximately 20 seconds after all doors are closed.
The courtesy lamps are controlled by the body control module (BCM). Inputs from the dome lamp switch and the door ajar switches are monitored by the BCM. When a door ajar switch is closed, or the dome lamp switch is turned to the ON position, the BCM supplies the B+ for the courtesy lamps.
With out a factory Tech2 scan tool or equivalent an knowing how these systems work ,you best bet is to take your vehicle to the dealer or some other ASE certified repair shop !
Sep 04, 2015 | 2009 Buick Enclave
Feb 05, 2014 | 2005 Dodge Durango
Nov 16, 2017 | 2006 Ford Explorer
Jan 25, 2012 | Ford Focus Cars & Trucks
Nov 06, 2011 | 2006 Dodge Durango
Sep 29, 2011 | 2003 Dodge Neon
Dec 15, 2009 | 2006 Ford Expedition
305 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: