Where is the pcm on 1989 crown Victoria ltd? - 1989 Ford Crown Victoria

Mike Schmidt

• 227 Answers

SOURCE: 1987 Ford Crown Victoria LTD

If it was an old police vehicle it has probably got an ignition kill switch located somewhere. This will have to be removed. And the wiring put back to factory standards. If not an old police car you are not getting voltage to the starter which is a bad relay. Do you get a clicking sound when you try to start? If yes, have someone keep hitting the start and listen and look for a relay under the hood.

Posted on Jan 19, 2009

edgar walker

• 3533 Answers

SOURCE: fuse box diagram for my 1989 crown victoria

it should under the lid of the fuse box and in the owners manual if no manual try here for one online www.edmonds.com

Posted on Mar 21, 2009

SOURCE: Need a fuse panel diagram for 91 Crown Vic.

Try this site
http://www.eautorepair.net/

Posted on Jul 14, 2009

SOURCE: firing order for 1989 crown victoria ltd

For the 1989 Ford Crown Victoria:
I do not know if you have the 5.0L or 5.8L; however I have included both below.

For the 5.0L
Firing Order:
1-5-4-2-6-3-7-8
Cylinders:
.......(back).......
|..4..|........|..8..|
|..3..|........|..7..|
|..2..|........|..6..|
|..1..|........|..5..|
.......(front)
Distributor:
.....(back)
[.]..5.....1
4..............8
2..............7
.....6.....3.[.]-clip
.....(front)

For the 5.8L:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
........(back).........
|...4...|.......|...8...|
|...3...|.......|...7...|
|...2...|.......|...6...|
|...1...|.......|...5...|
........(front)
Distributor:
.....(back)
[.]..3....1
7.............8
2.............4
.....6....5.[.]-clip

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Posted on May 30, 2010

Tunde Autos

• 2382 Answers

SOURCE: where is the fuse box

Hi, according to the original owners manual, "The fuse panel is located to the left of the steering column in the instrument panel. To expose the fuse panel, remove the lower steering column finish panel by removing the two retaining screws.

Take care

Posted on Aug 09, 2010