- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check park/tail fuse regarding dash ,park ,tail problem .brake light on passenger side is probably the brake globe needs replacing .Turn signals on passenger side could be globes or switch,check globes first ,if globes and fuse are ok ,may well be the switch especially if park switch and turn signals are on the same switch lever/stalk
There could be a couple of reason why your brake lights are not working these are all common faults.
1.first remove the brake lens and check globes.
2.Next check the globe socket as they tend to get hot and the plastic housing brakes away so the globes don't connect.
3.get a test light and check for power.
4.if everything is ok then I would be replacing the brake light switch under the dash that makes contact with brake pedal.
I'll help with the brake lights. 1st check fuse, 2nd there is a brake light switch located at the brake pedal you will need to get under the dash & find it. Remove plug from switch & bridge plug with wire If the lights come on the switch is faulty (have the ignition on while doing this) 3rd check brake globes it is possible all are blown.
Check brake light fuse first. If that's good, more than likely it's a brake light switch. It's mounted just above brake pedal under dash - small plastic switch w/a couple of wires coming from it. Easy fix..
well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch
Hi, you should check all the fuses in the vehicle. If all the fuses are OK, check the brake light globes. If all the globes are fine, look for power on the brake light switch and make sure that the power goes through make sure that you get power on the contact points of the globes. If there is no power you should trace the wires to where wires are broken.