Question about 2003 Chevrolet Impala

1 Answer

I am trying to remove the center console of a 2003 chevy impala to install an after market radio. Can someone give me directions please?

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There are 2 10mm bolts in the compartment hold of the center console that must be removed. Two similar 10 mm bolts must be removed at the front of the center console, near the driver's and passenger's lower legs. The top of the center console, where the shifter is located, snaps out. With this top piece removed, the cigarette and auxilary outlet can be disconnected. Four more bolts near the shifter bracket need to be removed, and then the console is free. Hope this helps someone. I needed to remove the center console to install a component for a car stereo.

Brian

Posted on Jul 07, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing a Dual XDVD276 radio in a 2005 Chevy Impala without the factory end of the wiring harness.


You will need to splice the wires as it will be hard to find the right connector to attach to the harness wires. Use the wiring diagram for the car (get it at Alldatadiy.com) and the one that came with the Dual unit to figure out which wires connect to each other.

Nov 30, 2017 | 2005 Chevrolet Impala

1 Answer

How to get the low tire pressure light to turn off on a 2003 Chevy Impala? I do not have the factory radio still installed. I had a Kenwood installed when I first got the car so I'm not sure how t


Temp fix is remove negative cable off battery for a few mins ,then replace,light might come back on but go to autozone have them do a code reader to tell what light means(if the code tells what is wrong)

Aug 08, 2012 | 2003 Chevrolet Impala

1 Answer

Why would a 2003 Chevy Impala's speakers not work? The radio and CD player work, but I get no sound what so ever. The car was bought used in 2009 and the radio has never worked. I was told that something...


This may be a anti-theft issue. If it is and you want it fixed, the Chevy Dealter is probably the best place to have this work done, IF it can be done at all. My Chevy radio instructions tell me that if there is a genuine power loss to the radio when the anti theft system is activated (like someone breaking into the car and stealing it, cutting the wires) that the radio will not work again with out GM intervention.

Mar 24, 2010 | 2003 Chevrolet Impala

1 Answer

Disarming therftlock radio on 2003 Chevy Impala.


I think you may have read it incorrectly...you do not disarm it, you need to know the code, so when you are finished, you can turn it back on.
If you don't have the code the dealer can give it to you.

Jun 27, 2009 | 2003 Chevrolet Impala

2 Answers

Theft system passlock on 2003 chevy malibu. theft


yr gonna have to get the passlock key and punch it into the radio so u can solve ur problem most chevy dealships can assist you with that.

Jun 18, 2009 | 2003 Chevrolet Impala

1 Answer

I am trying to replace the headlights on my 2003 chevy impala.


You open your bonnet, remove the bulb, check the watts and replace with a higher wattage bulb.

Mar 18, 2009 | 2003 Chevrolet Impala

1 Answer

Shift lever 2003 chevy Impala


sounds like that the position cable is seizing up seek WD 40 service perhaps !!

Oct 28, 2008 | 2003 Chevrolet Impala

1 Answer

To remove the stock stereo


Basically:

1: remove center console - 2 parts where the shifter is located... all of em use clips - just give it a nice pull and it'll pop off
2: remove driver side panel attached to radio console( 2 clips only)
3: remove screw found behind center pocket under a/c control
4: pop out a/c unit (4 clips - 2 on top 2 on bottom) just give it a nice pull... (was scary at first but easy and won't break anything)
5: pull entire front center panel (silver piece that covers radio/ac etc etc)
6: radio is attached via 4 screws - 2 on bottom - 2 on side
7: remove radio
8: make sure u have the AI install kit to install radio w/
9: reattach everything n you're done!

Jul 24, 2008 | 2003 Toyota 4Runner

Not finding what you are looking for?
2003 Chevrolet Impala Logo

1,461 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...