Becker Radio Code
If the display shows CODE WAIT then the car radio is probably blocked by too many incorrect entries. You can re-enter the code after leaving the device simply up to 3 hours with ignition ON !
- BUT:
if you DON'T know the code then you need to pay for a decoding service on eBay....
(I do hope you are the legal owner of the radio)
BECKER AM FM RADIO CD STEREO DECODE CODE KEY UNLOCK SERVICE
SOURCE: 1998 Diamante Radio code
just call the dealer and give them the serial number and the vin of the car make sure to ask for service deparment when you call
they shoul be able to give you the code
SOURCE: Mitsubishi Montero Sport Radio Code
Call your local MItsubishi dealership and ask for the service department.
<BR>They have a computer program where they punch in the serial number from your radio (you have to supply the number) and it will tell them the UNLOCK CODE for your radio. My dealership offered to give it to me free over the phone, if I knew my radio serial number. Enter the code using the buttons on your radio. And write the code down, this will show up everytime your radio looses connection to its power source - the car battery.
SOURCE: Radio Code
RADIO SAYS "UNLOCK CODE:" <BR>Call your local MItsubishi dealership and ask for the service department.
<BR>They have a computer program where they punch in the serial number from your radio (you have to supply the number) and it will tell them the UNLOCK CODE for your radio. My dealership offered to give it to me free over the phone, if I knew my radio serial number. Enter the code using the buttons on your radio. And write the code down, this will show up everytime your radio looses connection to its power source - the car battery. <BR> <BR>
If you need it - I called 360-696-2277 which is the local Mitsubishi Dealership for me here in Washington State. They were the ones who offered to give it to me over the phone..
2,525 views
Usually answered in minutes!
×