Hi can anyone help me with a code for my suzuki ignis stereo please ! 3 1927997 7643063510 3 39101-86G10 ID 39101-86G1 022903 FD385 CLASS 1 LASER PRODUCT SI355S202047CD
Nikolay Spasov code 3096
Code Entry as Follows:
Switch Radio On - Display Shows
" CODE "
Press and Hold "BAND"
The display will now show " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press and Hold "BAND" to Enter
thank
thank you ! good job!
your welcome glad to help
×
SOURCE: Where are the plugs on a Suzuki Ignis 02
I assume it's a petrol engine and the spark plugs will NOT be under the air box.It will probably have a coil pack which sits on the spark at the top...
SOURCE: Changed car battery unable to reset radio code...Help!!
ALL at the same time, try again!
Good Luck...
SOURCE: suzuki ignis 2002 oxgen sensor functions
It gets pretty hot in there, and although hardly any manufacturers specify replacement intervals for oxygen sensors, they play a critical role in providing the ECM with acurate data for best running performance/economy. Change it, as the savings in NOT changing it will be soon eroded by increased fuel usage.
SOURCE: Thickness of brake disks for Suzuki Ignis Sport 109 HP, 2004
Generally you do not want to let them wear anymore than 1/16 of an inch either inner or outer pad. The inner pad will wear a little faster than the outer, but you will want to go by which ever one is thinner. As far as the parameters of new disk, they will have a minimum thickness per DOT standards. The minimum thickness is usually stamped on the disk (rotor), if it is not you can get this info from your local repair shop, or auto supply shop.
SOURCE: Hi I have a suzuki ignis.My display has gone blank
The wiring may have gone bad in your car. Usually blown fuse and loss of power are the result of this. You may need to inspect the wiring loom underneath the dashboard where most of the wiring for the mentioned devices are located.
621 views
Usually answered in minutes!
pictures with s/n #
your code 3096 Code Entry as Follows: Switch Radio On - Display Shows " CODE " Press and Hold "BAND" The display will now show " 10 - - - - " Press preset " 1 " repeatedly for 1st Digit Press preset " 2 " repeatedly for 2nd Digit Press preset " 3 " repeatedly for 3rd Digit Press preset " 4 " repeatedly for 4th Digit If the correct code number is now shown Press and Hold "BAND" to Enter
thanks a lot mate !you are #1 !:-)
×