If the 140 amp is the same configuration as the original then choose the 140. The 140 amp rating is the available amps to give. Also go higher in amps available but maintain the same voltage for whatever device you're replacing.
I’m happy to assist further over the phone at https://www.6ya.com/expert/kevin_c38b47f462e94458
SOURCE: We need to replace the 120 amp alternator fuse but
A short or a bad battery could have caused the problem. If your taking it to a shop for repair, it becomes their problem and not your problem.
SOURCE: installing new sparkplugs on jeep compass
Gap is the same as original ones...should be on an under-hood sticker...Likely 35.
SOURCE: remove 2007 jeep compass bumper cover
Hello, I can assist you. Begin by rounding up the necessary tools:
7mm socket and ratchet
7mm wrench
10mm socket
screw driver or panel removal tool (for push rivets)
Now go to the following site and take a look at the step by step instructions and pictures which does a nice job of explaining this entire job. Thanks for using Fixya!
http://www.jeeppatriot.com/forum/showthread.php?t=6291
SOURCE: We need to replace the 120 amp alternator fuse but
the fuses blot in from the side you have to take the fuse box cover off first then you will see how it works
SOURCE: what size alternator do I
you need a 115 amp or 140 amp alternator:
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/subcategory_Alternators_-49997389_-49997327_10151_10051_-1___
634 views
Usually answered in minutes!
×