Question about Cars & Trucks
The brake cable may have stretched and isn't completely releasing. Or the switch under the handle isn't hitting the brake lever, maybe a pen or something under it ?
Posted on Dec 01, 2014
Sounds like you might have a caliper that is stuck and is not fully disengaging. If it is in the rear then you may have a bad rear caliper. Twoo things you can try. One is to crawl under the ca and adjust the tension two nuts on the emergency brake line. If that does not resolve the problem then remove the back tire and try to spin the drum or rotor whichever you may have. If it does not spin then try adjusting the e brake cable more if it still does not respond then you need to do a brake rebuild. Also does it pull while it is dragging? If it is then you will need to rebuild the brakes no matter what.
Posted on Feb 06, 2009
SOURCE: how do i change the
take out the bolts that hold the struts ***. to the spindles. tie rod loose -brake caliper off pull out off way after taking nut off at the end of axle. pry bar pop axle out of trans.
Posted on Nov 12, 2010
Tips for a great answer:
Nov 12, 2010 | 1991 Honda Civic
Dec 30, 2009 | 1991 Honda Civic
Jun 17, 2009 | 2007 Honda Accord Sedan
Jun 13, 2009 | 1994 Honda Civic Del Sol
Feb 06, 2009 | 1993 Honda Civic 4 Door
25 people viewed this question
Usually answered in minutes!