Cars & Trucks Logo

Related Topics:

Question about 2002 GMC Sierra 2500HD

Open Question

Looking for solenoid wiring diagram fisher plow mmi on 2002 gmc

Posted by Brett Wilson on

Check Price eBay
Ad

3 Related Answers

mmayton

Donna Mayton

  • 135 Answers

SOURCE: where would i find a free diagram for a solenoid

Go to any Advance or Autozone Store and buy the Chiltons Manual for your vehicle. They are around 19.99 and this will have every repair that you will ever need to repair anything on your car. I love theses books. They have pictures and step by step instructions. Hope this helps.

Posted on Dec 07, 2009

Ad

Anonymous

  • 67 Answers

SOURCE: with plow lights pluged in do not have low beam on

ca mention may be wrong un plug the 2 chk fuse and start overthen u no

Posted on Dec 11, 2009

Ad

MOTOR62500

  • 466 Answers

SOURCE: Im looking for a fisher

YOU WILL HAVE TO GO TO FISHER. TRY TO GOOGLE FISHER AND SEE WHAT HAPPENS. THANKS MOTOR62500...

Posted on Dec 22, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fisher Minute Mount 2 plow clicks @ solenoid only no operation?

First make sure you have a good cable feeding the solenoid battery terminal check with a test light if ok, turn the plow switch on and test both sides of the solenoid if there's battery voltage there check at the plow lift motor is it plugged in, if so check at the plow lift motor battery terminal and if it lights your light repair the motor....these motors are know for seizing or getting stuck if you take the cap off you can probably fix it, put a punch mark on the cap, barrel and end frame to ensure alignment when reassembled. I hope this helps. Take Care.
0helpful
1answer

Fisher plow on 2015 dodge ,plow motor won't shut off . Changed solenoid still doing the same thing. Any ideas

You should check out www.reliable-store.com
they have info on repair, service, wiring diagram, electrical diagram, fuse diagram, troubleshooting, PCV, owner's/service/repair/parts manual, fault codes, error codes, etc everything on all vehicles. must check it out
1helpful
1answer

I chang fues still no power fisher minit plow 2005 gmc plow work fine last year put on now no power to control box

May want to begin tracing the wiring harness from the plow all the way to the control box.
0helpful
1answer

I have a fisher minute mount 2 plow for some reason it only goes to the right now , not up or left , no matter what button I press on the control it goes right .

Start by plugging everything in and pop the cover off the control part on the plow and check for magnetism on all 3 solenoids when you hit the various buttons on your plow controller. The pull should be very strong and noticable...a weak magnetic pull is likely just residual magnetism on your screwdriver. In my case, the S3 solenoid wasn't firing and that causes exactly what you're describing.

If your S3 isn't firing you can test the wiring by moving the S3 hot wire to the S2 solenoid. If your wiring is good the plow will misbehave in an entirely different way. Also get out your ohm meter and test the S3, if its good you should get 7 ohms on it.

You need to use the guide from Fisher and be methodical about it. Start at the plow and work your way backwrds towards the truck.
0helpful
1answer

I have a minute mount plow, when I try to use it only goes to left and right side but doesn't go up, when I try to lift the plow goes to the right. What can I do

2002 Fisher Minute Mount Inst-Act Wont Angle [Archive] - PlowSite ...

www.plowsite.com > ... > Truck & Equipment Repair

Nov 17, 2011 - 90 posts - ‎9 authors
My plow went up it was jerking and did it in steps , but , it got there . Now , it onlyjerks when i try to angle it right or left or up . I filled the fluid ... Drop it and if it doesn'traise you can just use a jack and shorten the transport chain to hold it. .... I do havecontinuity on the plow side for all 3 wires going to the plug . Hooking Up A Fisher Minute Mount 2 In Under 1 ...
54 posts
Feb 1, 2011
Plow Wont Angle
32 posts
Oct 19, 2010
What's wrong with my plow?
21 posts
Jan 9, 2003
Looking For Minute Mount Tips
57 posts
Feb 13, 2002
More results from www.plowsite.com

Ultramount Intermittent Angle Problem - Snow Plow Forum - L


1helpful
2answers

Not sure how to hook up plow motor to battery? Its an old fisher speedcast plow with cable controls thats electic over hydralic.It has pos and neg. cables and a solenoid on the pos. cable. I assume you...

The heavy + should be connected to the battery through the solenoid for the motor. There should be wires to control the solenoid (an electric switch, you know). The - goes to the truck's frame at a place of your choice. The ground must be solid, you know that, right?

I think if I were doing this install, I would hook the plow ground with the battery ground on the fame or where ever it is located.

The plow control should be mounted for your convenience inside the cab.

Lets review: Plow motor | ground to ground, hot to solenoid (motor side) | solenoid (battery side) to battery | solenoid control wires to cab.

Thanks for your question at FixYa.com
0helpful
2answers

Lights on a fisher xtreme plow wont work

I'm guessing that you have already checked to make sure there is power going to the plow lights. If not use a test light and make sure. The most likely problem is the grounds from the plow lights themselves to the frame. Take the lights apart and check and/or replace the grounds, wires inside the case take a lot of vibration and that can cause them to fail.Don't forget to check the bulbs to be sure they're good too. Hope this helps.
0helpful
1answer

Where would i find a free diagram for a solenoid starter switch for a fisher plow?

Go to any Advance or Autozone Store and buy the Chiltons Manual for your vehicle. They are around 19.99 and this will have every repair that you will ever need to repair anything on your car. I love theses books. They have pictures and step by step instructions. Hope this helps.
Not finding what you are looking for?

265 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85240 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8991 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...