Question about 2007 Kia Sportage 4x4 V6
You can remove the motor connector under the hood, and apply +12v to the motor input and ground the two inputs to the motor windings, High speed and low speed.
Be sure you know the correct pins.
Hope this helps.
Posted on Apr 06, 2015
If you look close to the wiper motor, you should find a 2 wire plug. Unplug it. Connect a 12 volt test light across the 2 wires.Turn on the rear wiper switch with the key on + if it lights up, you need a new motor. If it doesn't light up check your fuse and remove the one going to r.wiper. See it it's bad and replace as necessary. Garcuda
Posted on Nov 29, 2014
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: