Question about 2008 Volvo XC90
Replaced right rear hub bearing. roaring is still there.
If it is a rear wheel drive car ck the gear oil , sounds like it does not have enough fluid in it, that is what make that sound , good luck and let me know how you make out ,
Posted on Nov 25, 2014
Testimonial: "put some gear oil in it,did not help.what is the next step?"
Make sure the abs sensor is plugged in all the way.. And also make sure that the abs ring.. was not damaged in the process of putting on the new bearing...
Posted on Mar 02, 2010
It could be drive shaft joint. the car is rear wheel drive with independant suspension. I do not think there is a bearing there. It may also be the brakes need replacing.
Posted on Dec 23, 2009
most front wheel bearings are pressed in you half to take the whole control arm off pull out the hub press out the bearing grease the new one and press it in its best to take it to a machine shop do not try pressing it in yourself
Posted on Mar 09, 2010
1. Remove the tire/wheel
2. Remove the top and bottom caliper
3. Remove the four bearing housing bolts on
the inside of the housing
You will need a soft mallet to whack the housing until it comes out...don't worry you cannot hurt anything but you hands and your pride.
Posted on Jul 24, 2012
Tips for a great answer:
Sep 23, 2015 | Cars & Trucks
May 14, 2014 | 2003 Buick Century
Aug 02, 2012 | 2000 Ford Mustang
Jun 16, 2011 | Toyota Camry Cars & Trucks
Nov 20, 2010 | Chevrolet Blazer Cars & Trucks
Feb 08, 2010 | 2005 Chevrolet Equinox
Jan 16, 2010 | 2004 Kia Sedona
Jul 06, 2009 | Chevrolet Impala Cars & Trucks
Oct 23, 2008 | 2001 Dodge Stratus
130 people viewed this question
Usually answered in minutes!