My 94 Oldsmobile cutlass ciera ECM fuse blows when I turn my steering wheel to the left why??

SOURCE: 1989 cutlass oldsmobile with tilt steering wheel ?

remove column trim, insert ket turn to on position, and push the pin in at the underside of the steering column pull straight out please rate -jeff

SOURCE: The windows in the 95 oldsmobile cutlass ciera won't work at all

maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.

SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera

ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.

Testimonial: "Thank you very much for your advice and time!"

SOURCE: How do you change a turn signal switch in a 1993

You have to remove the steering wheel and the plate that is behind it with two screwdrivers. unplug the wire hareness to that. you will also have to remove the screws that hold you hazzard light button on and remove the bottom of the steering column. Tie a string or wire to the harness so you can pull that back thru the column whn you have to reattach the new one.

SOURCE: Turn Signal on 1992 Oldsmobile Cutlass Ciera has

Both. What about the Directional Switch!