At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is there a SECURITY light lit on the instrument cluster ? What's the fuel pressure at ? Do you know how to test fuel pressure ? Does the check engine light come on when turning the key to run ,not start just the run position ? Did you try holding the gas pedal down a little way ? Go to you tube an check out videos on trouble shooting , engine won't keep running .
Well the ABS light(Anti-lock Brake System) light when lit means the computer has stored a trouble code. Also, this means the ABS system is off-line. The brakes function as usual but have the possibility of locking up in a panic stop situation. So to turn off the light you should take it to a qualified shop that can diagnose the trouble code with a scan tool (most likely a wheel sensor) and give you an estimate for the repair. Get your ABS system working again!
I hope this helps you
Your car's alarm might have bad wiring or connectors. You could try cleaning & reconnecting them. Or use a multimeter to see if you can find connectivity issues.
If the alarm itself might be the culprit, having a garage remove/disconnecting it is the cheapest solution (less than a $100), having it replaced could be really expensive ...
This is the dimmer switch.
It's also control on / off function.
=======
In addition to this switch on the dashboard there are pin switch on each door.
Check and make sure all the pin switches are OK.
A damage pin switch will keep the dome light on.
If this is the case then remove the dome light bulb unit you has time to to repair the damage pin switch.
Perhaps the computer is going bad, or the connections to it are bad.
Many lights on the dash are controlled by the computer, including the Service Engine Soon light which should go on when the ignition is turned on as a bulb check feature.
When the car starts and runs under its own power this light should go off and stay off if the emission control systems are in working order.
the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?
×