Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
Get the belt around all the pulleys except the A/C compressor or Alternator. The routing diagram is on one of the radiator supports.
The tensioner pulley is near the Alternator toward the
center of the engine. It's on a spring loaded arm. Get your socket on
the center nut of this pulley.
Slowly pull the ratchet toward the center of the
engine. The pulley will pivot on the arm allowing you to get the belt
on the final pulley.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The fuel filter on a 1995 Mercury Tracer Trio is on the firewall closest to the bottom of the driver's side. If you're looking at the engine from the front of the car you'll see the battery. $6.85 is the average price for a fuel filter.---------------------------------------------------------------------------------------------- Motorola 711 Programmer
This is a picture of the location of the cut off switch for the 1996 but I believe it is in the same location for the 1995. I hope this helps you and good luck.
give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
×